BEST 45KM IDH MAX Keyed Latch Magnetic Stripe Reader Mortise Lock

BEST 45KM IDH MAX MAGNETIC STRIPE READER MORTISE LOCK

The IDH MAX from BEST offers convenience and efficiency for your electrified lock applications. Instead of installing reader devices, installing electrified strikes, installing door contacts and installing request-to-exit devices, you can now install the IDH MAX in cylindrical or mortise lock applications. With IDH MAX all of the formerly separate equipment needed to control access are self-contained in a single installation. The complexity of multiple wire runs is drastically reduced. You can let BEST show you how to MAXimize your access control system with the IDH MAX! For the name and location of your local office, visit our web site at www.bestaccess.com. IDH MAX and W series locks are compatible with BEST's NT500 and most other Access Control Systems.

BEST’s IDH Max Series combines access control components—separate readers, strikes, and other equipment—into one durable lockset with only one connector. In addition to a lower visual profile, integrating components in the IDH Max reduces installation time and increases security. Designed to function on interior or exterior doors, and compatible with most access control systems, IDH Max delivers convenient, versatile results in a wide range of applications.

FEATURES & BENEFITS

IDH Max Features

Includes latch status, door status and request to exit features

NOTE: Latch Status not available on Deadbolt functions

• Requires only one 4 conductor wire run
• Reduces number of components installed and visible at the door (PIR, RQE push buttons and door contacts)
• Installation time is reduced
• The RQE switch senses the inside lever/knob rotation
• All of the door components are housed in one manufacturer’s hardware
• With the elimination of components, only the lockset is visible at the door
• The reader is integrated into the lockset escutcheon
• Available in magnetic stripe and proximity readers
• Available in all popular lever/knob styles and finishes
• Operates with BEST interchangeable core as a mechanical override
• Integrates with many manufacturer’s on-line EAC equipment

Mortise Features

• Lock case meets the requirements as listed in the ANSI/BHMA A156.13 standard for Series 1000, Grade 1 Operational and Grade 2 Security locks
• UL listed for GYQS Electrically controlled single point locks or latches for use on 3 hr, A label doors (4' x 10'). The listing applies for both U.S. and Canadian applications
• Door contact, request-to-exit, and latch status sensors positioned inside lock case

Magnetic Stripe Electronic Lock Features

• Durable material has teflon-like characteristics for increased life and wear resistance
• Variable read rate allows for easy usage

SPECIFICATIONS

Mechanical

Case – Heavy wrought steel, 5-7/8" H x 4-1/4" D x 1" W steel parts are zinc dichromate plated for corrosion protection.
Faceplate – Brass or bronze, 8" H x 1-1/4" W x 1/16" T . Lock face automatically adjusts to proper bevel during installation.
Strike – Brass, bronze or stainless steel base material, 4-7/8" H x 1-1/4" W x 3/32" T. Fits standard door frame cut out as specified in ANSI A115.1. Universal (non-handed) strike supplied standard with lock.. Backset – 2-3/4"
Door thickness – For doors 1-3/4" – 3" thick. (specify thickness when ordering).
Installation – Lock requires modified door prep to mount the trim. Faceplate dimensions fit standard door preparation as specified in ANSI A115.1,. Lockset is easily reversible to match door handing without opening the mortise case.
Latchbolt – Solid stainless steel, 3/4" throw. Latch is oil-impregnated for anti-friction operation. Reversible without opening case. Deadbolt – Solid stainless steel, 1" throw.
Auxiliary bolt – Stainless steel, non-handed.
Lever Handle – Brass, bronze, or stainless steel base material. Lever styles 3, 14, and 15 return to a minimum of 1/2" of door surface. Lever 12, 16 and 17 do not return.
Escutcheon – 10-1/2" H x 3-5/16" W x 1" D (1" at the top, sloping down to 3/4" at the bottom)
Knobs – Diameter: 2-1/8" Projection on door: 2-7/8" #4, #6 knobs: Material machined from brass or bronze.
Lever handle – Brass, bronze or stainless steel. (Lever #3, #14 and #15 conform to California Titles 19 and 24.)
Mounting – Knob and lever attached with hardened set screw on inside knob or inside lever.

Electronic

Maximum current draw – 1.1 Amp for 50 milliseconds. Typical current draw (hold condition): 650 milliAmps Voltage: 10.2 to 13.2 V (DC only) Magnetic Stripe Card Reader
Read Rate – 5 inches per second to 50 inches per second.
Card Thickness – ISO standard .030” ± .003 thick. Compliance to FCC, Canadian, and European EMC requirements; for interference FCC Class A digital apparatus.
Proximity Reader – ANSI/BHMA A156.25 compliant. Compatible with Motorola / Indala and HID proximity cards. ABA and Wiegand output. Weatherproof bezel and gasket provide protection for outdoor use. (Usable in most environmental/exterior applications)
Card Read Range – 0 – 3 inches. Compliance to US FCC, Canadian FCC, and European EMC requirements
ESD Protection – 15 Kilo Volt

Finishes

605 – bright brass, clear coated

606 – satin brass, clear coated

611 - Bright Bronze

612 – satin bronze, clear coated

613 - Satin Bronze Oil-Rubbed

625 – bright chromium plated

626 – satin chromium plated

630 – Satin Stainless

626AM – Satin Chrome Antimicrobial

630AM – Satin Stainless Antimicrobial

690 – dark bronze coated

DOWNLOAD & RESOURCES

• IDH MAX Sell Sheet

• W&M Series Catalog

• BEST Electronics Brochure

• EAD & DHW Warranty Statement

• PSEBH Multi-tech Reader Sell sheet