BEST 8KW Series Electrically Locked Function (Fail-Safe) Grade 1 Electromechanical Cylindrical Knob Locks

BEST 8KW SERIES ELECTROMECHANICAL CYLINDRICAL LOCKS

Our wired mechanical locks provide a unique way to lock and unlock the door from a remote location for safety, security, or convenience.

The BEST 9KW electromechanical locks provide fail-safe (electrically locked) and fail-secure (electrically unlocked) operations through an individual switch, switch lock, relay, access control system or other automatic control system. More importantly, these locks exhibit the same features and meet the same standards and specifications as the BEST mechanical 40H mortise and 8K/9K heavy-duty cylindrical locksets.

FEATURES

• Non-handed levers allow for ease of installation
• Lock chassis meets the requirements as listed in the ANSI/BHMA A156.2, standard for Series 4000 Grade 1 locks
• UL listed for GYQS Electrically controlled single point licks or latches for use on 3 hr, A label single doors (4' x 10') GYJB. The listing applies for both U.S. and Canadian applications
• Request-to-exit sensor positioned inside lock trim
• The ISC (Intelligent System Controller) is embedded behind the escutcheon secured and out of site
• Request-to-exit and door contact sensors are standard in IDH MAX cylindrical locks

SPECIFICATIONS

Types

• 12 volts AC/DC when used with supplied TCM — 0.50 amps
• 24 volts AC/DC when used with supplied TCM — 0.18 amps
• All EU functions: Electrically Unlocked (Fail Secure)
• All EL functions: Electrically Locked (Fail Safe)

Approval Listings

• UL listed for GYQS Electrically- controlled singlepoint locks or latches.
• This product has been approved by the California State Fire Marshal (CSFM) pursuant to section 13144.1 of the California Health and Safety Code.
• Approved by the city of New York Board of Standards and Appeals under calendar number 730-89-SA. See CSFM listing No. 4136-1175:103. It is subject to re-examination, revision and possible cancellation

Door thickness

• Standard lock configuration designed for doors 1 3/4" – 2 1/4" thick. NOTE: All W-series locks require the use of a (TCM) Temperature Control Module. A TCM and TCM connector are supplied standard with every order.

RESOURCES & DOWNLOADS

W Series Sell Sheet
W&M Series Catalog
BEST Electronics Brochure
EAD & DHW Warranty Statement