Cal-Royal

Cal-Royal SC8050 Grade 1, Office/Entrance Mortise Lockset Features FOR DOORS - 1 ¾” (44.5mm) thick standard. LOCK HAND - Lock bodies are easily fielded reversible, no need to...

Cal-Royal SC8070 Grade 1, Classroom Mortise Lockset Features FOR DOORS - 1 ¾” (44.5mm) thick standard. LOCK HAND - Lock bodies are easily fielded reversible, no need to...

Cal-Royal SC8080 Grade 1, Storeroom Mortise Lockset Features FOR DOORS - 1 ¾” (44.5mm) thick standard. LOCK HAND - Lock bodies are easily fielded reversible, no need to...

Cal-Royal SC8453 Grade 1, Entrance Mortise Lockset Features FOR DOORS - 1 ¾” (44.5mm) thick standard. LOCK HAND - Lock bodies are easily fielded reversible, no need to specify...

Cal-Royal SC8456 Grade 1, Corridor Mortise Lockset Features FOR DOORS - 1 ¾” (44.5mm) thick standard. LOCK HAND - Lock bodies are easily fielded reversible, no need to specify...

Cal-Royal SC8473 Grade 1, Dormitory/Bedroom Mortise Lockset Features FOR DOORS - 1 ¾” (44.5mm) thick standard. LOCK HAND - Lock bodies are easily fielded reversible, no need...

Cal-Royal SC8060 Grade 1, Apartment Entrance Mortise Lockset Features FOR DOORS - 1 ¾” (44.5mm) thick standard. LOCK HAND - Lock bodies are easily fielded reversible, no need...

Manufactured from wrought brass Adjustable threaded barrel for accommodating various door clearances Conforms to ANSI / BHMA A156.9 B23013 Architectural finishes available

Individually packed with protective film and screws Easy installation Thickness: 1,27mm Architectural finishes available Dimensions: 381mm x 88,9mm

Manufactured from wrought brass Adjustable threaded barrel for accommodating various door clearances Conforms to ANSI/BHMA A156.9 B23013 Architectural finishes available Jamb-mounted lip strike...

Individually poly-bagged Ideal for sliding doors Conforms to ANSI / BHMA A156.16 B22201 and A156.14 D2781

Generally used on closet doors where latch is not used or needed Diecast material Jamb-mounted lip strike Conforms to ANSI / BHMA A156.9 B23013 Architectural finishes available

Cal-Royal CGN00 Grade 1 Entrance Lock - ANSI F80 Deadlocking latchbolt operated by key in outside Lever or rotating inside Lever. Outside Lever is always fixed...

CAL-ROYAL NEWSH44R FULL MORTISE ROUND CORNER .110" GAUGE SPRING HINGE 4"X 4", 1/4" RADIUS Lifetime Warranty on Commercial Grade Hinges. BHMA CERTIFIED

Designed for superior strength and smooth operation Deep cup finger hole and double action spring combine to assure ease of operation and automatic holding of bolt in either projected or retracted...

Cal-Royal BA04 Communicating - ANSI F80 Deadlocking latch bolt by knobs/levers except when either knob/lever is locked by key in its own cylinder.   FEATURES DOOR RANGES: - 1 3/8" to...

SBRS3 Solid Brass Rigid Door Stop with molded screw Packed with both white and black rubber tips 3" Projection Easy installation Comparable to IVES #64 Architectural finishes...

SRB82 Constructed in heavy duty Cast Brass Base: 2” Diameter Projection: 4 1/4” SRB82 conforms  to ANSI / BHMA 156.16, L02191 Designed for use in locations when doors coverage at...

CURB19 Constructed in heavy duty Cast Brass Height (Base): 1 3 /4”, Width (Base): 2 1 /4” Projection: 2 3/4” CURB19 is used where two doors open against each other to prevent...

4CWS-21 Commercial grade wall door stop for high traffic conditions Rubber tip does not scar nor mark surface of door With 3 mounting holes Includes mounting hardware for all wall construction...