Cal-Royal

Cal-Royal SC8050 Grade 1, Office/Entrance Mortise Lockset Features FOR DOORS - 1 ¾” (44.5mm) thick standard. LOCK HAND - Lock bodies are easily fielded reversible, no need to...

Cal-Royal SC8070 Grade 1, Classroom Mortise Lockset Features FOR DOORS - 1 ¾” (44.5mm) thick standard. LOCK HAND - Lock bodies are easily fielded reversible, no need to...

Cal-Royal SC8080 Grade 1, Storeroom Mortise Lockset Features FOR DOORS - 1 ¾” (44.5mm) thick standard. LOCK HAND - Lock bodies are easily fielded reversible, no need to...

Cal-Royal SC8453 Grade 1, Entrance Mortise Lockset Features FOR DOORS - 1 ¾” (44.5mm) thick standard. LOCK HAND - Lock bodies are easily fielded reversible, no need to specify...

Cal-Royal SC8456 Grade 1, Corridor Mortise Lockset Features FOR DOORS - 1 ¾” (44.5mm) thick standard. LOCK HAND - Lock bodies are easily fielded reversible, no need to specify...

Cal-Royal SC8473 Grade 1, Dormitory/Bedroom Mortise Lockset Features FOR DOORS - 1 ¾” (44.5mm) thick standard. LOCK HAND - Lock bodies are easily fielded reversible, no need...

Cal-Royal SC8060 Grade 1, Apartment Entrance Mortise Lockset Features FOR DOORS - 1 ¾” (44.5mm) thick standard. LOCK HAND - Lock bodies are easily fielded reversible, no need...

TRIM: Wrought Brass or Stainless Steel.DOOR RANGES: Adjustable 1-3/8” (35mm) to 1-3/4” (45mm) door thickness.BACKSET: Adjustable 2 ⅜” or 2-3/4”.DEADBOLT FACEPLATE: Standard...

SRB82 Constructed in heavy duty Cast Brass Base: 2” Diameter Projection: 4 1/4” SRB82 conforms  to ANSI / BHMA 156.16, L02191 Designed for use in locations when doors coverage at...

CURB19 Constructed in heavy duty Cast Brass Height (Base): 1 3 /4”, Width (Base): 2 1 /4” Projection: 2 3/4” CURB19 is used where two doors open against each other to prevent...

SWB Constructed of Solid Brass Tamper-proof mounting Included with grey convex rubber bumper that absorbs impact Dimensions: Base Diameter: 1"; Overall Proj.: 1/2" Comparable to IVES...

CONWB42 Manufactured using Stainless Steel or Solid Brass Rubber bumpers have small hole for insertion of screw drivers for easy installation Conforms to ANSI/BHMA 156.16 L22201 for brass and L52101...

WB26 Manufactured using Stainless Steel or Solid Brass Rubber bumpers have small hole for insertion of screw drivers for easy installation Included with convex rubber bumper that absorbs impact, and...

FRGCO65 Projection: 7” BHMA: 4.1.1 Type 25 Used on pairs of doors with or without an astragal  Adjustable for ease of installation  Architectural finishes...

AUXAUTOFLM1 1 set includes 1 Auto Flush Bolt (Top) 1 Auxiliary Fire Latch (Bottom) Auto Flush bolt Face Plate: 1" × 6 3/4" Bolt Head: 1/2" Square Bolt Throw: 3/4" Fastener: #8 ×...

AUTOFLM1 Includes 2 Auto Flush Bolt (Top and Bottom) Face Plate: 1" × 6 3/4" Bolt Head: 1/2" Square Bolt Throw: 3/4" Fastener: #8 x 1” Material: Steel BHMA 4.4 Type...

PRIULDV200 200° Glass Lens 1” Head diameter; 9/16” Bore For doors 1-3/8" to 2" thick UL fire rated 20 minutes Heavy duty privacy cover Conforms to ANSI/BHMA A156, 16 L23172 door...

DAP77 Door Angle Protector with Adhesive and Individual Screw for secure mounting. Designed for use with BDHG88 and PDG88 Door Guards. Architectural finishes available: US3, 4, 5, US26, 26D,...

  Zinc Diecast Swing Bar Door Guard   Features Ball Bearing Stop Guide Die-cast material Individual poly-bagged Packed screw Arm Length: 4-1/4" Architectural finishes...

Cal-Royal CAL40 Grade 1 Extra Heavy Duty, Dummy Lock Single dummy trim for one side of door. Pull only.   FEATURES DOOR RANGES 1 ⅜” to 2” thickness doors. ANSI...