Don-Jo KP634 Kick Plate for Re...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$60.68
Don-Jo KP634 Kick Plate for Remodeling and Repair, 6" x 34" with Satin or Brass Tone Finish

Don-Jo KP634 Kick Plate for Remodeling and Repair, 6" x 34" with Satin or Brass Tone Finish

(No reviews yet) Write a Review

Model: KP-634-BT
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$60.68
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo KP634 Kick Plate for Remodeling and Repair, 6" x 34" with Satin or Brass Tone Finish

The Don-Jo KP634 is a display-packaged kick plate engineered for remodeling and repair applications, measuring 6" x 34" to provide reliable door protection in commercial settings. Each plate is furnished with a grain or satin finish running horizontally to the door, available in finishes 605, 630, and Brass Tone (BT) to complement a wide range of door styles. The innovative dual-layer packaging features an outer corrugation that keeps the inner package fresh for display, and supports both hanging and stacking for convenient retail or jobsite storage. Every unit is individually packaged and includes #6 x 5/8 SMS full-threaded stainless steel sheet metal screws with a plated finish for a complete, ready-to-install solution.

Key Features

  • Precise Dimensions: Measures 6" x 34", purpose-built for remodeling and repair door protection applications in commercial environments.
  • Horizontal Grain/Satin Finish Orientation: Grain or satin finish runs horizontally to the door for a clean, professional appearance aligned with standard door aesthetics.
  • Multiple Finish Options: Available in finishes 605, 630, and Brass Tone (BT) to match a variety of door hardware and decor schemes.
  • Included Fasteners: Individually packaged with #6 x 5/8 SMS full-threaded stainless steel sheet metal screws with a plated finish for secure, corrosion-resistant installation.
  • Innovative Display Packaging: Outer corrugation protects the inner package and keeps it fresh for display; package supports both hanging and stacking configurations.
  • Display Package Size: Outer display package dimensions are 8-1/4" x 38-1/2" for easy shelf or peg display management.
  • Shelf Pack: Sold individually (shelf pack of 1) for flexible ordering and inventory management.

Technical Specifications

  • Product Group: Door Trim and Accessories
  • Product Subgroup: Door Armor and Protection Plates
  • Product Type: Door Protection and Kick Plates
  • Commercial/Residential: Commercial
  • Package: No
  • Product Category: Door Trim and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Don-Jo KP634?

Don-Jo kick plates are built for demanding commercial environments, combining durable construction with thoughtful design details like horizontally oriented grain or satin finishes and full-threaded stainless steel fasteners for a lasting, professional installation. The KP634's display-ready packaging with outer corrugation protection ensures product integrity from warehouse to jobsite, making it a dependable choice for remodeling and repair professionals who require both quality and convenience.

Product Specs

Subcategory:
Kick Plates
Product Group:
Door Trim and Accessories
Product Subgroup:
Door Armor and Protection Plates
Product Type:
Door Protection and Kick Plates
Commercial/Residential:
Commercial
Package:
No
Product Model:
KP 634
Product Size:
6" x 34"
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Don-Jo KP-634-BT – Frequently Asked Questions

1) Do I need to buy screws to install a Don-Jo KP634 kick plate?
No, the fasteners come in the package. Each KP634 ships with #6 x 5/8 full threaded stainless steel sheet metal screws with a plated finish, which is what you want on a wood or wood core door. Nothing else is needed beyond a drill and a countersink pilot. On a hollow metal door many installers switch to a self tapping machine screw or use adhesive backing instead, since the supplied SMS screws are sheet metal thread.
2) Don-Jo KP634 vs Hager 190S kick plate - what is the difference?
The Don-Jo KP 634 is a 6 inch by 34 inch plate offered in 605 polished brass, 630 satin stainless steel, and BT brass tone aluminum, with the grain or satin finish running horizontally to the door and #6 x 5/8 stainless sheet metal screws in the package. The Hager 190S referenced as 32D is a satin stainless steel plate with four beveled edges, part of Hager's 190 Series. If a brass or brass tone face is what the other hardware on the opening calls for, the KP 634 carries those finishes; if the job is standardized on the 190 Series, the 190S is the matching plate.
3) What is the stainless steel equivalent to a Don-Jo KP634 kick plate?
For a stainless steel protection plate in place of the Don-Jo KP 634, the Hager 190S in 32D satin stainless steel is the closest peer, and the Ives 8400 Series stainless steel door protection plate covers the same job. The KP 634 itself is offered in 630 satin stainless steel alongside 605 polished brass and BT brass tone aluminum, so if satin stainless is the target finish it can be had in the Don-Jo line directly. The Hager 190S and the Ives 8400 both carry beveled edges on the plate.
4) I need a beveled edge kick plate - does the Don-Jo KP634 have beveled edges?
If beveled edges are a requirement of the spec, the Hager 190S and the Ives 8400 Series are the plates in the comparable group that state four beveled edges and beveled edges respectively. The Don-Jo KP 634 is described by its 6 inch by 34 inch size, its horizontally running grain or satin finish, and its 605, 630, and BT finish choices. On a healthcare or education corridor where a drawing calls out a beveled plate edge by name, order against the Hager 190S or Ives 8400 rather than assuming an equivalent.
5) What finishes does the Don-Jo KP634 kick plate come in?
Three: 605 polished brass, 630 satin stainless steel, and BT brass tone aluminum. 630 is the one that matches the satin stainless pulls, push plates, and lever trim on most commercial openings. 605 is the bright polished brass. BT is an aluminum plate given a brass tone, so it reads brass without being brass, which is the usual pick when you want the look on an interior door at a lighter weight. On all three the grain or satin runs horizontally across the door.
6) Is the Don-Jo KP634 rated for commercial traffic or is it a residential plate?
Commercial. Don-Jo lists the KP634 as a commercial product, and the typical applications are offices, schools, healthcare, retail, warehouses, multi-tenant residential, and government buildings. It is packaged for remodeling and repair work rather than new construction spec jobs, which is why it comes individually with its own fasteners instead of in a bulk carton.
7) Can I use an Ives 8400 instead of a Don-Jo KP634 on the same door?
Both are door protection plates fastened to the face of the door, so the swap is a question of size and finish rather than function. The Ives 8400 Series is a stainless steel plate with beveled edges. The Don-Jo KP 634 is fixed at 6 inch by 34 inch, so confirm the 8400 is ordered in a width and length that matches the 6 inch rise and the 34 inch run already on the door, and that the existing screw pattern is either reused or new pilot holes are acceptable on that door face. Where a run of doors already carries the 8400, matching it keeps the openings consistent.
8) Do the Hager 190S and Ives 8400 come with mounting screws like the Don-Jo KP634?
The Don-Jo KP 634 is individually packaged with #6 x 5/8 SMS full-threaded stainless steel sheet metal screws in a plated finish, so the plate arrives ready to hang. Order fasteners separately when specifying the Hager 190S or the Ives 8400 Series unless they are confirmed with the plate. For a contractor doing a run of remodel openings in one trip, having the screws in the KP 634 package removes a second line item from the pull list.
9) How many Don-Jo KP634 kick plates come in a box?
One. The KP634 is sold individually as a shelf pack of one, each in its own display package with the screws inside. Order per door, so a 12 door corridor is 12 units.
10) How much shelf or peg space does a Don-Jo KP634 kick plate take up in a display?
The outer display package runs 8-1/4 x 38-1/2 inches. It is built to hang on a peg or stack flat, with an outer corrugation protecting the inner package, so a distributor can merchandise it either way without a separate fixture.
How fast can I get the Don-Jo KP-634-BT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo KP-634-BT come with a warranty?
Absolutely. The Don-Jo KP-634-BT is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo KP-634-BT?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo KP-634-BT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!