Dormakaba

OVERVIEW LM Pivot Sets and Components Whatever your pivot requirements turn to DORMA and put the weight of your door on our pivots. DORMA's commitment to quality is your assurance of durability and...

Can also be used on non lead-lined doors, extra heavy or thick doors The hole pattern in the pivot is staggered to straddle the lead in the center of the door Pivot standard design includes needle...

OVERVIEW This floor plate can be used to cover and protect nearly any BTS75V closer. It will work in 3/4” or 1-1/2” offset applications as well as those that...

The Dorma 15323 arm package is the 1-1/2" offset arm used with floor closers. The arm is handed and supplied with a decorative cap and mounting screws.

ApplicationFull Mortise HandingNon-handed Features   Standard top pivot for most Dorma 1-1/2" offset pivot sets and floor closers Designed for flush door and frame conditions Furnished with...

Dorma 8831 side load top arm for RTS88 overhead concealed closers. For aluminum or steel doors with a minimum 1/2" top door rail channel depth.

OVERVIEW This Dorma BP89 is used with 8900 series closers. It is used for top jamb mounting applications when the frame face is less than 2-7/8". Top Set of Holes Create Top Jamb Drop Application to...

OVERVIEW DP86 - For top jamb mount with slim plastic cover to clear a surface applied stop/holder. Overhead ceiling clearance must be 1-3/4 (44 mm) or more. Permits parallel arm installation with...

OVERVIEW For Top Jamb Mount of 8600 Series Closers When Overhead Ceiling Clearance is Less Than 2-1/4" (57 mm) or for Regular Mount to Clear a Mortised Stop/Holder.