Hager 4940 - 4500 Series Alarm Kit

Alarm

100 decibel horn sounds immediately upon pressing push pad

Alarm Timing

• Alarm will sound either 1, 3, 5 minutes or continuously,
• Times are selectable by on board switches

Cylinders/Cores

• 1-1/8” or 1-1/4” Mortise cylinders acceptable
• Hager standard cam required
• Cylinder sold separately

LED Indicators

LED Indicator

• Red LED will illuminate intermittently when armed
• Green LED will illuminate when unarmed
• Blue LED will illuminate in service mode
• Alternate colors flash when battery low

Notes

If ordering alarm kit (ALK) separately, must specify if using with 4500 Series (4500 Series - 4940)

Options

• Tamper Switch available that sounds alarm when end cap is removed
• Latch monitor switch is available that sounds alarm when latch is retracted without actuating the push pad
• Latch Monitor Switch typically used with Surface Vertical Rod devices
• When utilizing the latch monitor, the outside trim unit will also sound alarm

Outputs

Alarm is equipped with output port

Product Description

4500 Alarm Kit - 4940

Warranty

• One year on electrified components
• Lifetime on hardware components

Activation

• Alarm is armed by turning key clockwise,
• Alarm is disarmed by turning the key counter-clockwise,
• Alarm is turned to service mode by turning the key counter-clockwise twice

Battery

• Standard 9-Volt battery required, by other
• Audible chirp and alternating LED color flash when battery is low

Indicator

• LED Indicator,
• Red LED will illuminate intermittently when armed,
• Green LED will illuminate when unarmed
• Blue LED will illuminate in service mode,
• Alternate colors flash when battery low

Warning Decal

“Emergency Exit Only – Alarm will Sound” on push pad of exit device