Ives 7230 3/4" Offset Pivot Se...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,053.10
$645.58
Ives Ives 7230F 3/4" Offset Pivot, 1000lb with Top Header Mount and Bottom Base Mount, Fire Rated 7230F

Ives 7230 3/4" Offset Pivot Set with 1000lb Capacity Fire Rated Heavy-Duty Door Hardware

(No reviews yet) Write a Review

Model: 7230F SET SP28
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,053.10
$645.58
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Ives 3/4" Offset Pivot Set with 1000lb Capacity Fire Rated Heavy-Duty Door Hardware

Professional Heavy-Duty Pivot Solution for Fire-Rated Applications

The Ives 7230F 3/4" offset pivot set delivers exceptional performance for heavy-duty commercial applications with a maximum door load capacity of 1000 pounds. This fire-rated pivot system is recommended for use with 1-3/4" minimum door thickness doors and features a 3/16" vertical adjustment range with positive locking mechanism. Certified to ANSI/BHMA A156.4 standards and UL 10C tested for 3-hour fire rating, this non-handed pivot set includes both top header mount and bottom base mount components for complete installation.

Professional Features & Benefits

  • Heavy-Duty Load Capacity: Maximum door load of 1000 pounds for demanding commercial applications requiring superior weight support.
  • Fire-Rated Performance: UL 10C tested and approved for 3-hour fire rating, meeting critical safety requirements for fire-rated door assemblies.
  • Precision Adjustment: 3/16" vertical adjustment range with positive locking mechanism allows precise door positioning and load balancing during installation.
  • Door Compatibility: Recommended for 1-3/4" minimum door thickness with 1/8" bevel in 2" for optimal performance and proper fit.
  • Structural Load Distribution: Reduces stress on door frame by distributing weight throughout floor and building structure, leveraging structural strength for heavy door applications.
  • Superior Corrosion Resistance: Stainless steel construction with all exposed parts designed for maximum corrosion resistance in demanding environments.
  • Complete Set Configuration: Includes 7230F Top header mount and 7230F Bottom base plate mount components for comprehensive pivot installation.
  • Non-Handed Design: Universal configuration eliminates handing requirements, simplifying specification and installation processes.

Technical Specifications

  • ANSI/BHMA: ANSI/BHMA A156.4 C07162
  • Application: Heavy-Duty, Fire-Rated
  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Door Hand Direction: Non-Handed
  • Door Weight: Up to 1,000 lbs
  • Duty Level: Heavy Duty
  • Electronic: No
  • Fire Rated Time: 3 hours
  • Fire Rating: Yes
  • Hang Type: Offset Hung
  • Mounting Method: Offset
  • Pivot Type: Top & Bottom
  • Product Attribute: Pivots
  • Product Category: Door Hinges and Pivots
  • Product Group: Door Hinges and Pivots
  • Product Model: 7230F
  • Product Subgroup: Pivots and Pivot Sets
  • Product Substrate: Stainless Steel
  • Product Type: Pivots - Offset
  • Subcategory: Hinges and Pivots

Installation & Operation

  1. Review manufacturer specifications and verify door preparation requirements including 1-3/4" minimum door thickness and proper door weight distribution for 1000 pound capacity.
  2. Use manufacturer-provided templates to mark mounting hole locations accurately on door header and floor base positions for offset pivot configuration.
  3. Prepare door, header, and floor surfaces by drilling required holes and routing as specified in manufacturer instructions for top and bottom pivot components.
  4. Install top header mount pivot (7230F Top) and bottom base plate mount pivot (7230F Btm) using appropriate mounting hardware per manufacturer torque specifications.
  5. Utilize the 3/16" vertical adjustment range with positive locking mechanism to precisely position door and balance the 1000 pound load capacity throughout the full range of motion.
  6. Test pivot operation to verify smooth door movement and proper load distribution. Make final adjustments using the positive locking vertical adjustment mechanism as needed. Refer to manufacturer documentation for complete installation details and fire-rated assembly requirements.

Professional Applications

  • Commercial Office Buildings with Heavy Entry Doors
  • Educational Facilities Requiring Fire-Rated Assemblies
  • Healthcare Institutions with High-Traffic Areas
  • Government and Municipal Buildings
  • Industrial Facilities with Heavy-Duty Door Requirements
  • Multi-Tenant Residential Properties
  • Retail Establishments with Large Format Doors

Why Choose Ives Quality?

Ives pivot systems deliver professional-grade reliability with stainless steel construction and precision bearings engineered for smooth operation under demanding loads. Certified to ANSI/BHMA A156.4 Grade 1 standards and UL 10C tested for 3-hour fire rating, this pivot set provides the durability and safety compliance required for critical commercial applications. The positive locking vertical adjustment mechanism and 1000 pound load capacity ensure dependable performance in heavy-duty installations where structural integrity is essential.

Product Specs

Subcategory:
Hinges and Pivots
Product Group:
Door Hinges and Pivots
Product Subgroup:
Pivots and Pivot Sets
Product Type:
Pivots - Offset
ANSI/BHMA:
ANSI/BHMA A156.4 C07162
Door Weight:
Up to 1,000 lbs
Commercial/Residential:
Commercial
Hang Type:
Offset Hung
Duty Level:
Heavy Duty
Fire Rated Time:
3 hours
Electronic:
No
Pivot Type:
Top & Bottom
Mounting Method:
Offset
Application:
Heavy-Duty, Fire-Rated
Product Attribute:
Pivots
Product Model:
7230F
Door Hand Direction:
Non-Handed
Fire Rating:
Yes
Product Category:
Door Hinges and Pivots
Product Substrate:
Stainless Steel
Department:
Door Hardware

Ives 7230F SET SP28 – Frequently Asked Questions

1) Is the Ives 7230F pivot approved for a 3 hour fire rated door assembly?
The 7230F offset pivot is fire rated to 3 hours and UL 10C tested, and it's certified to ANSI/BHMA A156.4 C07162. That covers it for fire rated openings in schools, hospitals, and government buildings where the door assembly has to hold a 3 hour label. Non-rated pivots in the same offset style will not.
2) Do I have to order the Ives 7230F left hand or right hand?
The main 7230F pivot is non-handed, so one part number covers either swing and you don't need to know the hand to order the top or bottom. Handing only comes up on the intermediate pivot: that one is ordered as 7230FINT LH or 7230FINT RH. So if your door needs an intermediate, get the hand right on that piece.
3) Does the Ives 7230F come as a complete set or do I buy the top and bottom separately?
Both ways. Order 7230FS for the top and bottom base as a set, or buy the pieces individually as 7230FT top base and 7230FB bottom base if you're only replacing one end. There is also a 7230FINT intermediate pivot, sold on its own and handed left or right, which fits 7230F through 7237F. For a new install on a tall or heavy leaf, the set plus an intermediate is the usual combination.
4) Can I use a Kaba Ilco IP-10 or IP-12 intermediate pivot on a fire-rated opening in place of the Ives 7230F?
No. The Kaba Ilco IP-10 Series and IP-12 Series are intermediate pivot hinges for aluminum doors and frames, both standard duty and not fire rated. The Ives 7230F is fire rated with a 3 hour fire rated time and certified to ANSI/BHMA A156.4 C07162, which is what a fire-rated door assembly requires. If the opening carries a fire label, the 7230F or another fire rated pivot is the correct choice; the IP-10 and IP-12 belong on non-rated aluminum storefront openings.
5) Which 3/4 inch offset top pivot should I use on a lighter door instead of a 1000 lb heavy-duty set?
The Dormakaba 75120 is a 3/4 inch offset hung full mortise standard top pivot, fire rated, at a standard duty level. It matches the 3/4 inch offset hung preparation the Ives 7230F uses but is built for standard duty rather than the 7230F's heavy duty rating and door weights up to 1,000 lbs. For an entry leaf well under that weight the 75120 covers the top point; where the leaf is heavy or the traffic is punishing, the 7230F set is the heavy duty answer and includes the bottom base plate as well.
6) Can I adjust door height after the 7230F pivots are installed?
There is 3/16 inch of vertical adjustment with a positive locking mechanism, so you can set the leaf height and undercut clearance after hanging and lock it there. That's the range you have to work with, so the floor and header prep still has to be close to template. It is not enough travel to correct a badly out of level opening.
7) Offset pivot or center hung pivot for a heavy commercial door?
The 7230F is offset hung, meaning the pivot point sits off the door edge and the leaf swings one way, clear of the frame. That is what you want on a heavy fire rated door with a closer and a stop, and it is the common choice on hollow metal entrances. Center hung is for doors that swing both directions, typically with a floor closer. If the drawing calls out offset hung with a 3/4 inch offset, the 7230F matches it.
8) What else could I use instead of the Ives 7230F offset pivot?
If you need the same 3/4 inch offset hung geometry, the Dormakaba 75220 is a 3/4 inch offset hung full mortise intermediate pivot rated heavy duty and fire rated, and the Dormakaba 75120 is a 3/4 inch offset hung full mortise top pivot, though that one is standard duty rather than heavy duty. For a wider offset, the Dormakaba 15220 is a 1-1/2 inch offset right hand intermediate pivot, heavy duty and fire rated, but the offset dimension has to match the rest of the opening so it is not a drop-in for a 3/4 inch layout.
9) Will the 7230F work for a heavy wood door over 200 pounds, or do I need a floor pivot set?
Either can carry it. The 7230F offset pivot set handles up to 1,000 pounds and mounts as a top header and bottom base plate. The Dormakaba 7471K is a side load floor pivot set specifically recommended for wood doors or any door over 200 pounds, heavy duty and fire rated. Side load matters on a job where the leaf has to come out later without disturbing the floor plate, so pick on how the door gets serviced.
10) What do I use for a heavy wood door instead of an offset pivot set?
The Dorma 7471K is a side load floor pivot set recommended for wood doors or any door weighing in excess of 200 pounds, rated heavy duty and fire rated. Side load means the door loads into the floor pivot from the side, which changes the installation sequence and the floor preparation compared with the Ives 7230F, an offset hung set with a bottom base plate mount and a 3/16 inch vertical adjustment. The 7230F is rated for doors up to 1,000 lbs and calls for 1-3/4 inch minimum door thickness. Choose the 7471K where the opening is set up for side load floor pivots; choose the 7230F where the header and floor are prepped for offset hung.
11) What is the difference between the Ives 7230F pivot set and the Hager 253 reinforcing pivot?
They do different jobs. The Hager 253 is a full surface reinforcing pivot for 4-1/2 inch wide hinges in a zinc plated finish, heavy duty and not fire rated, and it is used to back up a door that still hangs on butt hinges. The Ives 7230F is the hanging hardware itself, an offset hung top and bottom pivot set carrying up to 1,000 lbs with 3 hour fire rating in stainless steel. Both list a 1-3/4 inch door thickness figure, but a reinforcing pivot does not replace a pivot set on a pivot-hung opening.
12) I need a non-handed intermediate pivot. Which options avoid calling out a hand?
The Kaba Ilco IP-12 Series intermediate pivots for aluminum doors and frames are non handed, standard duty and not fire rated. On the Ives side the 7230F set itself is non-handed, but the intermediate pivots in the 7230F range are ordered by hand as 7230FINT LH or 7230FINT RH for the 7230F through 7237F range. So if the opening is fire rated you order the Ives intermediate with a hand; if it is a non-rated aluminum door, the IP-12 removes the handing decision.
13) What finishes does the Ives 7230F offset pivot come in?
Ten finishes: 605 bright brass, 612 satin bronze, 622 matte black, 629 bright stainless, 630 satin stainless, 643E aged bronze, 689 aluminum painted, 691 bronze painted, 695 dark bronze, and 706 brass painted. For matching a run of openings, 630 satin stainless and 689 aluminum painted are the two that blend with most commercial hollow metal and aluminum work. The pivot body is stainless steel with exposed parts made for corrosion resistance, so exterior and washdown areas are fair game.
14) Is the Ives 7230F pivot an electrified or power transfer part?
No, the 7230F is purely mechanical. If the opening needs power to the leaf for an electric lock or exit device, that goes through a separate transfer device, not through this pivot.
15) If I standardize a facility on one heavy-duty fire-rated pivot, what are the finish options compared with the alternatives?
The Ives 7230F is offered in 605 Bright Brass, 612 Satin Bronze, 622 Matte Black, 629 Bright Stainless Steel, 630 Satin Stainless Steel, 643E Aged Bronze, 689 Aluminum Painted, 691 Bronze Painted, 695 Dark Bronze and 706 Brass Painted, over stainless steel construction. Among the heavy duty fire rated comparables, the Dormakaba 15220 is a brass pivot in satin chrome and the Dorma 7471K is satin chrome, each a single finish. For a facility matching a specific architectural finish across many openings, the 7230F finish range covers more of the palette from one model.
How fast can I get the Ives 7230F SET SP28 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ives 7230F SET SP28 come with a warranty?
Absolutely. The Ives 7230F SET SP28 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ives 7230F SET SP28?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Ives 7230F SET SP28 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!