You may also like
Deltana PPH3515 Push Plate 15" for 8" Door Pull
Model: DEL-PPH3515
Push Plate 15" for 8" Door PullPush Plates for Pulls are an accessory to Deltana's array of large Door Pulls. They are available in an array of fine finishes. Fits with DP2576 (pull with Rosette) or...
Deltana
Starting at
$52.40
$30.09
Deltana PPH3520 Push Plate 20" for 10" Door Pull
Model: DEL-PPH3520
Push Plate 20" for 10" Door PullPush Plates for Pulls are an accessory to Deltana's array of large Door Pulls. They are available in an array of fine finishes. Fits with DP2578 (pull with Rosette) or...
Deltana
Starting at
$66.90
$38.42
Falcon SC90A-18PA Mounting plate - Push side for SC90A Series Door Closers
Model: FAL-SC90A-18PA
Falcon SC90A-18PA Mounting plate - Push side for SC90A Series Door Closers
Required for parallel arm mounting where top rail is less than 4 5⁄8" (117 mm), measured from the stop. Plate requires 2...
Falcon
$45.00
$26.15
IVES 8200 DOOR PUSH PLATE
- Ives Push Plates are available in 0.050 thick brass, stainless steel or aluminum
Substrate Selections
- Finish 628 is for an Aluminum substrate
- All other finishes are for a Brass substrate
IVES PUSH AND PULL PLATES OVERVIEW
Ives offers a wide selection of door hardware push plate and pull plates that coordinate with Ives door pulls. There are several mounting packages, center-to-center spacing and cylinder or cutout options specific to any door and pull. Featuring more than 10 finishes, the plates can suite with the surrounding door hardware of any door opening.
FEATURES AND BENEFITS
Aesthetics
- All plates come standard with four beveled edges and countersunk mounting holes
- Offered in different widths and heights, as well as custom orders
Reliability
- Meets ANSI A156.06, Grade 1
- Heavy-duty mounting hardware exceeds industry standards
- All stainless steel plates come standard in 300 series
Installation
- Ives 8200 Push Plates are available with a cutout for a cylinder
- Can integrate with aluminum, wood or hollow metal doors
- Other mounting hardware available for concealed or back-to-back mounting applications
DESIGNS & FINISHES
Designs
- Models come as push or pull
- Choose from plates prepped with pull center-to-center spacing
- Offered in various widths and heights, as well as custom orders
Finishes
- Available in brass and stainless steel substrates
- Custom finishes are available as engineering specials; consult Customer Service for orders
- To view the full design and finish offering, see individual models in the Ives full line catalog
AVAILABLE OPTIONS
With each kickplate, a variety of mounting packages are available that exceed industry standards. For the various models, there are various pull center-to-center options, as well as mounting packages for different door substrates, including:
Thru-bolt options:
- Standard screw with decorative washer
- Thru-bolt with countersunk holes
Concealed mount options:
- Aluminum doors
- Wood doors
- Hollow metal doors
- With pull plates
Back-to-back mount options:
- Hollow metal/wood doors
Manufacturer Resources
Ives Full Line Catalog
Product Specs
- Product Group:
- Door Trim and Accessories
- Subcategory:
- Pulls and Push Plates
- Product Subgroup:
- Door Pulls, Push and Pull Plates
- Product Type:
- Push and Pull Plates
- ANSI/BHMA:
- ANSI A156.6
- Commercial/Residential:
- Commercial
- Tags:
- large door push plates, door lock blank plate, oversized door push plates
- Product Model:
- 8200
- Product Category:
- Door Trim and Accessories
- Product Substrate:
- Brass, Aluminum or Stainless Steel
Ives 8200-3x12-US32D – Frequently Asked Questions
1) What is the Ives 8200 push plate designed for?
The Ives 8200 is a commercial-grade push plate for interior and exterior doors. It provides a durable surface for pushing doors open while protecting the door from wear and fingerprints.
2) What door types and weights work with this push plate?
The 8200 mounts on standard commercial doors including wood, metal, and fiberglass. Verify your door thickness and material compatibility. Works with most door weights when properly fastened.
3) How do I choose between brass and aluminum finishes?
Brass offers traditional appearance and corrosion resistance for high-end applications. Aluminum provides modern look with lightweight durability. Consider existing hardware finishes and environmental conditions.
4) Can this push plate be used on both sides of a door?
Yes, you can install matching push plates on both sides of a door. Order two units for double-sided installation. Ensure proper spacing from door edges and hardware.
5) What are the standard dimensions of the Ives 8200?
Check the manufacturer specifications for exact dimensions. Measure your door area and verify clearance from existing hardware before ordering. Standard commercial sizes typically fit most applications.
6) Does this meet commercial building code requirements?
The Ives 8200 is designed for commercial use. Verify local code requirements for push plate specifications, mounting height, and accessibility compliance with your project requirements.
7) What fasteners and mounting hardware are included?
Check the product specifications for included mounting hardware. Standard installations typically use through-bolts or machine screws. Use fasteners appropriate for your door material and thickness.
8) How do I properly install this push plate?
Mark mounting holes using manufacturer template. Drill pilot holes appropriate for your door material. Install with proper fasteners and torque specifications. Ensure plate sits flush and secure.
9) How do I clean and maintain the push plate?
Clean with mild soap and water. For brass, use appropriate metal cleaner to maintain finish. Avoid abrasive cleaners that can scratch the surface. Regular cleaning prevents buildup and maintains appearance.
10) Are there other Ives push plate models available?
Ives manufactures various push plate styles and sizes. Browse our door hardware section for alternative models and matching accessories from the Ives product line.
11) Can this push plate withstand exterior weather conditions?
Both brass and aluminum versions offer good weather resistance. Consider local climate conditions and exposure levels. Proper finish maintenance extends outdoor service life significantly.
How fast can I get the Ives 8200-3x12-US32D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ives 8200-3x12-US32D come with a warranty?
Absolutely. The Ives 8200-3x12-US32D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ives 8200-3x12-US32D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Ives 8200-3x12-US32D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.