You may also like
FS1153 PLUNGER TYPE DOOR HOLDER
IVES DOOR STOPS OVERVIEW
With a full line of wall bumpers, wall holders, kick down holders and hinge pin stops, Ives products are designed to ensure that doors will not slam into the wall. These accessories are typically found on doors without an overhead stop or holder.
FEATURES AND BENEFITS
DESIGNS & FINISHES
Designs
RESOURCES & DOWNLOADS
Ives Full Line Catalog
- Provides a contemporary yet economical method of positive hold-open;
- Spring operated plunger activates with minimal pressure, releasing instantly with
a light tap on the plat-form lever; - Provides a 1-5/8" throw for all types of doors;
- Ribbed grey non-marring rubber shoe is securely fastened to unit with a screw
and is easily replaced when worn; - Packed with fasteners for wood applications.
IVES DOOR STOPS OVERVIEW
With a full line of wall bumpers, wall holders, kick down holders and hinge pin stops, Ives products are designed to ensure that doors will not slam into the wall. These accessories are typically found on doors without an overhead stop or holder.
FEATURES AND BENEFITS
- The stops prevent door, wall and frame damage, and stopping the door from opening too far
- Designed in brass, aluminum, iron, steel, and zinc construction and a variety of finish options
- Utilize non-marring rubber to protect the finish of walls, molding, and doors
- Specific product series offer concealed tamper-proof mounting
- Meets ANSI/BHMA 156.16
DESIGNS & FINISHES
Designs
- Floor stops: Floor stops are mounted to the floor and stop the door from opening too far and hitting the wall or another door.
- Floor stops and holders: These products not only stop the door, but also can hold the door open with a hook or roller catch that is connected to the door.
- Wall bumpers/stops: Wall bumpers and stops are mounted to the wall and stop the door from opening too far and hitting the wall or another door.
- Wall holders: These products not only stop the door, but also can hold the door open with a hook or roller catch that is manually connected to the door.
- Kick down holder: Kick down holders are mounted to the door face and can either be in the up position to let the door swing freely or the down position to hold the door open at different angles
- Roller bumpers: Roller bumpers are typically mounted on a door to prevent two doors from slamming into each other. The roller bumper stops the second door from opening and rolls the second door to a completely open or closed position.
- Residential door stops: Residential door stops are mounted at the base of the door or wall to stop from opening too far and hitting the wall or another door.
- Hinge pin stops: Hinge pin stops are mounted on the hinge pin to stop the door from opening too far and hitting the wall or another door.
- Silencers: Silencers are installed on metal frames featuring pneumatic design that, once installed, form an air pocket to absorb shock and reduce the noise of the door closing.
- Roller bumpers: Roller bumpers are typically mounted on a door to prevent two doors from slamming into each other. The roller bumper stops the second door from opening and rolls the second door to a completely open or closed position.
RESOURCES & DOWNLOADS
Ives Full Line Catalog
Manufacturer Resources
Product Specs
- Subcategory:
- Stops
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Door Stops, Holders, Silencers & Bumpers
- Product Type:
- Plunger Door Holders
- ANSI/BHMA:
- ANSI/BHMA 156.16, L11401
- Commercial/Residential:
- Commercial
- Product Model:
- FS1153
- Product Dimension:
- H: 5-1/2", W: 2", D: 1-1/4"
- Product Category:
- Door Trim and Accessories
- Product Substrate:
- Aluminum
Ives IVE-FS1153-US28 – Frequently Asked Questions
1) What is the Ives FS1153 aluminum plunger door holder used for?
The FS1153 is a wall-mounted plunger-type door holder that keeps doors open at a fixed position. The plunger extends to catch and hold the door, preventing it from swinging closed.
2) What door weights and sizes is this holder compatible with?
Verify compatibility with your specific door weight and width using the manufacturer's specifications. Most plunger holders work with standard commercial doors but check the template for proper positioning.
3) Can this door holder work with both left and right hand doors?
Most plunger door holders are universal and work with both left and right hand doors. The wall mounting position determines which door swing it will accommodate.
4) What finishes are available for the FS1153?
This model features an aluminum finish. Check the product specifications for exact finish details and any additional finish options that may be available.
5) What is the holding strength of this plunger door holder?
Holding strength varies by model and installation. Verify the manufacturer's specifications for maximum door weight and wind load ratings for your specific application.
6) Does this door holder meet building code requirements?
Check local building codes and fire safety requirements. Some applications may require holders that automatically release during fire conditions. Verify compliance for your specific project.
7) What hardware is included with the FS1153?
Most door holders include basic mounting hardware. Check the package contents and verify you have appropriate fasteners for your wall type and construction.
8) How do you install a plunger-type door holder?
Mount the holder to the wall at the correct height using the manufacturer's template. Position it so the plunger catches the door at the desired open position. Use appropriate fasteners for your wall construction.
9) How do you adjust the holding position?
Most plunger holders have limited adjustment. The door opening angle is determined by the wall mounting position. Some models allow minor plunger extension adjustments.
10) What are similar alternatives to the FS1153?
Consider other Ives door holders or similar plunger-style holders from our door hardware selection. Floor-mounted door stops are another alternative for some applications.
11) Will this work in high-traffic commercial applications?
Aluminum construction provides durability for commercial use. Consider the frequency of door operation and potential impact when selecting door holders for high-traffic areas.
12) What measurements do I need before ordering?
Measure door width, weight, desired open angle, and wall space for mounting. Check clearances and verify the holder dimensions will work in your specific installation location.
How fast can I get the Ives IVE-FS1153-US28 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ives IVE-FS1153-US28 come with a warranty?
Absolutely. The Ives IVE-FS1153-US28 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ives IVE-FS1153-US28?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Ives IVE-FS1153-US28 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.