You may also like
IVES FS410 FLOOR STOP
- Non-directional;
- Packed with fasteners for light duty masonry and wood applications;
- Black rubber ring.
IVES DOOR STOPS OVERVIEW
With a full line of wall bumpers, wall holders, kick down holders and hinge pin stops, Ives door stops are designed to ensure that doors will not slam into the wall. These accessories are typically found on doors without an overhead stop or holder.
FEATURES AND BENEFITS
- The stops prevent door, wall and frame damage, and stopping the door from opening too far
- Designed in brass, aluminum, iron, steel, and zinc construction and a variety of finish options
- Utilize non-marring rubber to protect the finish of walls, molding, and doors
- Specific product series offer concealed tamper-proof mounting
- Meets ANSI/BHMA 156.16
DESIGNS & FINISHES
- Ives Floor stops: Floor stops are mounted to the floor and stop the door from opening too far and hitting the wall or another door.
- Floor stops and holders: These products not only stop the door, but also can hold the door open with a hook or roller catch that is connected to the door.
- Wall bumpers/stops: Wall bumpers and stops are mounted to the wall and stop the door from opening too far and hitting the wall or another door.
- Wall holders: These products not only stop the door, but also can hold the door open with a hook or roller catch that is manually connected to the door.
- Kick down holder: Kick down holders are mounted to the door face and can either be in the up position to let the door swing freely or the down position to hold the door open at different angles
- Roller bumpers: Roller bumpers are typically mounted on a door to prevent two doors from slamming into each other. The roller bumper stops the second door from opening and rolls the second door to a completely open or closed position.
- Residential door stops: Residential door stops are mounted at the base of the door or wall to stop from opening too far and hitting the wall or another door.
- Hinge pin stops: Hinge pin stops are mounted on the hinge pin to stop the door from opening too far and hitting the wall or another door.
- Silencers: Silencers are installed on metal frames featuring pneumatic design that, once installed, form an air pocket to absorb shock and reduce the noise of the door closing.
- Roller bumpers: Roller bumpers are typically mounted on a door to prevent two doors from slamming into each other. The roller bumper stops the second door from opening and rolls the second door to a completely open or closed position.
Manufacturer Resources
Ives Full Line Catalog
Product Specs
- Minimum Purchase:
- 2 units
- Subcategory:
- Stops
- Product Group:
- Door Trim and Accessories
- Duty Level:
- Light Duty
- Package Includes:
- Fasteners for light duty masonry and wood applications
- Product Subgroup:
- Door Stops, Holders, Silencers & Bumpers
- Product Type:
- Door Stops - Floor
- ANSI/BHMA:
- ANSI/BHMA A156.16
- Commercial/Residential:
- Commercial
- Tags:
- heavy duty floor stop
- Product Model:
- FS410
- Product Dimension:
- 1-1/2" x 1/4" x 1-1/4"
- Product Category:
- Door Trim and Accessories
- Product Substrate:
- Brass
Ives FS410-US26D – Frequently Asked Questions
1) What is the Ives FS410 Universal Floor Dome Stop used for?
The FS410 is a floor-mounted door stop designed to prevent doors from swinging too far and hitting walls or fixtures. It mounts directly to the floor and uses a dome-shaped bumper to cushion door contact.
2) Is this floor stop compatible with all door types?
The FS410 works with most standard swing doors including wood, metal, and composite doors. Verify door clearance and swing radius before installation. Not suitable for sliding or folding doors.
3) What finishes are available for the FS410?
Check the product specifications for available finishes. Ives typically offers multiple finish options to match door hardware. Confirm finish availability when ordering.
4) How do I determine the correct mounting location?
Open the door to the desired stopping position and mark where the door edge will contact the stop. Position the stop so the door contacts the dome portion. Allow slight clearance for smooth operation.
5) What type of flooring can this be installed on?
The FS410 can be mounted on concrete, wood subfloors, and other solid surfaces. Use appropriate fasteners for your floor type. Avoid installation on loose tiles or unstable surfaces.
6) Are there building code considerations for floor stops?
Floor stops must not create trip hazards or interfere with egress paths. Check local codes for accessibility requirements. Some applications may require low-profile or recessed stops.
7) What fasteners are needed for installation?
Use fasteners appropriate for your floor material. Concrete anchors for concrete floors, wood screws for wood substrates. Verify fastener requirements in the installation instructions.
8) How is the FS410 installed?
Mark the mounting location, drill pilot holes if required, and secure with appropriate fasteners. Follow manufacturer template for hole spacing. Ensure stop is level and firmly attached.
9) Does this floor stop require maintenance?
Floor stops require minimal maintenance. Periodically check fasteners for tightness and clean debris from around the base. Replace if dome becomes cracked or mounting becomes loose.
10) What are the dimensions of the FS410?
Check product specifications for exact dimensions including height, base diameter, and mounting hole spacing. Verify clearances with door swing before installation.
11) Are there alternative Ives floor stop models?
Ives offers various door stops including different heights, profiles, and mounting styles. Consider wall-mounted or magnetic stops for different applications.
How fast can I get the Ives FS410-US26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ives FS410-US26D come with a warranty?
Absolutely. The Ives FS410-US26D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ives FS410-US26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Ives FS410-US26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.