Ives WS20/WS20X Manual Wall Holder for Drywall or Masonry Mounting

• Hexagon section on unit aids in fastening unit when expansion shield is used;
• Replaceable black rubber bumpers feature off-set shoulder and threaded shank that
  screws into body of holder;
  
• Hinged strike furnished matches body material and finish;
• WS20 is packed with fasteners for drywall/wood applications;
• WS20X is packed with fasteners for heavy duty masonry applications.

Substrate Selections

• Finish 628 is for an Aluminum substrate
• All other finishes are for a Brass substrate

• Floor stops: Floor stops are mounted to the floor and stop the door from opening too far and hitting the wall or another door.
• Floor stops and holders: These products not only stop the door, but also can hold the door open with a hook or roller catch that is connected to the door.
• Wall bumpers/stops: Wall bumpers and stops are mounted to the wall and stop the door from opening too far and hitting the wall or another door.
• Wall holders: These products not only stop the door, but also can hold the door open with a hook or roller catch that is manually connected to the door.
• Kick down holder: Kick down holders are mounted to the door face and can either be in the up position to let the door swing freely or the down position to hold the door open at different angles
• Roller bumpers: Roller bumpers are typically mounted on a door to prevent two doors from slamming into each other. The roller bumper stops the second door from opening and rolls the second door to a completely open or closed position.
• Residential door stops: Residential door stops are mounted at the base of the door or wall to stop from opening too far and hitting the wall or another door.
• Hinge pin stops: Hinge pin stops are mounted on the hinge pin to stop the door from opening too far and hitting the wall or another door.
• Silencers: Silencers are installed on metal frames featuring pneumatic design that, once installed, form an air pocket to absorb shock and reduce the noise of the door closing.
• Roller bumpers: Roller bumpers are typically mounted on a door to prevent two doors from slamming into each other. The roller bumper stops the second door from opening and rolls the second door to a completely open or closed position.