Klein Tools

Screwdriver Set, 1000V Insulated, 3-Piece Features Tether hole for added safety when working at height Flame Retardant and Impact Resistant Handle Tip-Ident® quickly identifies the screwdriver tip...

Metric Combination Wrench 9 mm Warnings Do NOT push or hammer wrench. Do NOT extend handle length. Always wear approved eye protection. Features Open-end and box wrenches have the same size...

2-in-1 Metric Impact Socket Set, 12-Point, 5-Piece Features Sockets are color coded to quickly identify sizes Eight sizes combined into 4 sockets including - 32 x 27 mm, 30 x 22 mm, 24 x19 mm, and...

Tape Measure 5m Magnetic Double-Hook Features Includes imperial markings in centimeters and inches Durable steel belt clip for convenience Double-sided rule for measurement while using against wall,...

Snap Lock Punch Warnings NOT insulated. Will NOT protect against electrical shock. Always wear approved eye protection. Never use on or near live electrical circuits. Features For use on sheet...

2-in-1 Impact Socket, 12-Point, 7/8 and 11/16-Inch Features High-torque, 12-Point design is easier to position and works with square fasteners Cross hole design to prevent unintentional separation...

Tree Trimming Safety Harness XL Features Softee back and seat pads are made of non-abrasive nylon for extra comfort during prolonged use. Permanently attached tree-trimmers belt has four forged...

2-in-1 Penta/Hex Flip Socket with Adapter Warnings Always wear approved eye protection. Features Deep well socket with 1/2-Inch drive works great for hardware installation and removal Flip...

Nylon Webbing Lanyard, 1/2-Inch by 6-Foot Features Equipped with two drop-forged steel, corrosion-resistant Klein-Lok locking snap hooks with 11/16-Inch (17 mm) throat opening Long-strand...

Reversible Ratcheting Box Wrench, 5/8 x 11/16-Inch Warnings Do NOT push or hammer wrench. Never use on or near live electrical circuits. Do NOT extend handle length. Always wear approved eye...

Heritage 8-7/8" Bandage Shear Features Adjustable blade tension Cuts clothing, gauze, tape, bandages and band-aids Stamped stainless steel blades Engineered by Klein Cutlery

AC Plug to Banana Jacks Warnings Read, understand, and follow all warnings and instructions before operating testers. Use personal protective equipment to prevent shock and arc blast injury where...

Tool Kit, 28-Piece Warnings Do NOT open the tape measure case. Spring motor is under tension, and opening case may cause injury. The tool belt provided in this kit is NOT an occupational protective...

Deceleration Lanyard with 3 Hooks Features 6-Foot (1.83 m) working length Contains energy-absorbing inner core made of polyester Red warning label indicates when unit has been subjected to severe...

3/8" Drive "D" Socket Wrench Set, 9 Pc Features Two extensions: 3'' (76 mm) and 5'' (127 mm) long One 3/8'' (10 mm) -drive reversible ratchet 7-7/8'' (200 mm) long Weight 2.7 pounds Hinged red metal...

K-Type to Banana Plug Adapter Warnings Do not use the meter during electrical storms or in wet weather, and do not use the meter or test leads if they appear to be damaged. Read, understand and...

Safety Harness for Tower Work, M Features Friction slide adjusters hold shoulder straps in place so the user does not need to readjust for each use. Durable 1-3/4'' (44 mm) Type 19, or equivalent,...

3/8" Magnetic Hex Drivers, 10-pack Features 1/4-Inch hex shank with quick release groove Strong rare earth magnets for maximum holding For driving sheet metal screws. Size engravement for easy...

Nylon Webbing Lanyard, 1/2-Inch by 5-Foot Features Equipped with two drop-forged steel, corrosion-resistant Klein-Lok locking snap hooks with 11/16-Inch (17 mm) throat opening For use in...

Slim-Tip 1000V Insulated Screwdriver, #1 Phillips, 6-Inch Warnings Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source. Whenever...