Klein Tools

Insulated Screwdriver, #2 Phillips Tip, 6-Inch Round Shank Warnings Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source. Only use...

Slim-Tip 1000V Insulated Screwdriver, #2 Square, 6-Inch Round Shank Features Meets or exceeds ASTM F-1505-16 and IEC 60900 -2018 Tip-Ident® quickly identifies the tip type and orientation Made in...

2-in-1 Impact Socket Set, 12-Point, 5-Piece Warnings Always wear approved eye protection. Features Two coaxial, spring-loaded socket sizes in each tool 12-point design is easier to position and...

90-Tooth Ratcheting Combo Wrench Set, Metric, 8-Piece Features Premium foam roll pouch with internal flap to prevent tools from falling out and hang holes for open storage Ergonomic handle with...

Hard Hat, Non-Vented, Full Brim Style, Yellow Features Universal accessory slots on both sides for attaching hearing protection, face shield and more Klein accessories (sold separately):...

Wire Rope Punch, 1-1/4-Inch Warnings Eye protection and gloves must be worn when using this product. Wear safety goggles user and bystander. Features Urethane ring around head to reduce...

Heavy Duty Shear Large Ring, Ball Tips, 9-1/8-Inch Features Durable enough to stand up to the demands of professionals that use them everyday Straight blade Scissors are proudly made in the...

Cowhide Leather Gloves, Small Features Engineered for heavy-duty, wire pulling work Slip on style for quick on and off Dual layer reinforced split leather palm patch for increased durability Premium...

Combination Wrench 1-1/16-Inch Features Open-end and box wrenches have the same size opening on each end Open ends offset at 15-degree angle for confined working areas 15-degree angle offset of box...

6-in-1 Swaging Punch Features Suitable for use on copper, aluminum and mild steel tubing High-alloy steel, heat-treated for strength and durability Made in USA Swages six sizes of tubing -...

4 mm Metric Nut Driver 3-Inch Shaft Warnings Always wear approved eye protection. NOT insulated. Will NOT protect against electrical shock. Features Made in USA Meets or exceeds applicable ASME /...

7/16-Inch Standard 6-Point Socket, 3/8-Inch Drive Features For use with socket wrenches Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product Built...

Winter Thermal Gloves, Medium Features Machine washable Comfortable knit fabric on the back of hand ensures that these gloves are flexible and comfortable enough for all day wear Soft, synthetic...

Rapi-Driv® Screwdriver, #2 Phillips, 6-Inch Shank Warnings Do NOT use to pry or chisel. NOT insulated. Will NOT protect against electrical shock. Always wear approved eye protection...

K-Type Temperature Pipe Clamp Features Accuracy of the thermocouple is dependent on the accuracy of the meter being used Banana plug adapter also sold separately (Cat. No. 69146) Works with any...

Hard Hat Earmuffs for Cap Style and Safety Helmets Warnings Read all instructions and warnings before using this product. Failure to follow these instructions and warnings may result in serious...

Combination Wrench, 1-Inch Warnings Do NOT extend handle length. Always wear approved eye protection. Do NOT push or hammer wrench. Features Nickel chrome plated Open ends offset at 15-degree...

3-Inch Extension Warnings Always wear approved eye protection. Features Since 1857, Klein Tools has manufactured the world's finest hand tools Male Square 3/8-Inch Drive Knurled handle for...

ACSR Ratcheting Cable Cutter Features Replacement cutting inserts with screws (Cat. No. 63858) available At a length of just under 14-Inch (356 mm), tool can be carried in a tool pouch Tool can be...

Heavy Duty Shear, 8-5/8'' Features Cuts fabric, rubber and felt Scissors are proudly made in the USA Resists corrosion and rust Chrome over nickel plated, carbon steel 718LR-P - spec sheet