Norton Rixson 5200 Series Low Energy Power Operators Electromechanical Door Closer

ELECTRICAL DATA

• Power input 120 VAC, 3A, 60Hz
• Max current draw 1.5A
• Power output 24VDC @ 0.4A max draw

SPECIFICATIONS

• Door Control (interior) (exterior) closing force shall be adjustable to ensure adequate closing control.
• Door Operator shall simulate conventional door closer opening and closing forces unless the power operator motor is activated.
• Door Operator shall have electronic backcheck to cushion the door speed if door is opened violently. (Door Operator shall be SELECTIVELY ACTIVATED by external initiating device, i.e. wall switch, etc.) (Door Operator shall be both AUTOMATICALLY ACTIVATED and SELECTIVELY ACTIVATED.)]
• Operator shall have selectable power close to provide additional closing force to overcome conditions that may prevent door from latching.
• Unit shall have delay switches for motor activation, electric lock interfacing, and hold open time. Units shall have 24VDC @ 0.4A maximum output for connection of electric strike, lock, radio frequency receiver, etc.
• Unit shall have a three-position Selector Mode Switch that will permit the unit to be switched “ON” to monitor for function inputs, switch to “H/O” for infinite hold open function or switched “OFF” which will disable function inputs allowing unit to be used as a manual door closer.
• Unit shall be U.L. Listed for automatic closing door.
• The Unit shall be adjustable to provide compliance with the requirements of the Americans with Disabilities Act (ADA).
• Unit shall be certified by BHMA to meet A156.19 requirements. • Unit shall meet UL325/991 standards.

CERTIFICATIONS

• ANSI/BHMA A156.19 certified
• UL325/991 certified
• Complies with requirements for the Americans with Disabilities Act (A.D.A)
• Manufactured in an ISO 9001 and ISO 14001 certified facility