NUVO Lighting 60-6974 Intention, 4-Light, Vanity, Warm Brass and Black Finish

Bulbs are not included. The Intention 60-6974 takes four E26 medium base lamps, rated 60W each, with a G25 globe shape intended by the design. At 120V, any standard medium-base G25 globe will seat; dimming depends entirely on the lamp you choose, since the fixture itself has no driver.

Plan for at least 21-3/4 inches of clear width. The fixture is 21.75 inches wide, 5.5 inches high, and projects 7 inches off the wall, so keep the 7 inch extension in mind if the mirror sits in a tight alcove or a medicine cabinet door swings nearby.

Yes, it carries a damp location rating, which covers a typical bathroom wall where it sees humidity but not direct spray. It is an indoor, wall-mount fixture and is cETLus safety listed. Do not install it inside a shower enclosure or anywhere it would be hit by water, which needs a wet-rated fixture.

No. The Intention 60-6974 is not ADA compliant, and its 7 inch projection off the wall is the reason it will not meet protruding-object limits in an accessible route. For an ADA restroom spec, look for a vanity or sconce with a shallow extension that is listed as ADA compliant.

Dimming is lamp dependent. There is no integrated LED driver, so the fixture passes 120V straight to four E26 sockets. Put dimmable lamps in it and a standard incandescent or LED-compatible dimmer will work; non-dimmable bulbs will not dim no matter what switch is on the wall.

It is a lamp-based fixture, classed as incandescent technology with four replaceable E26 sockets rather than an integrated LED module. That is an advantage for property maintenance: when a light goes out you swap a bulb instead of the whole fixture, and you can choose LED G25 globes to cut the load. Color temperature is set by the lamp, since the fixture is not CCT selectable.

The Intention 60-6974 is a two-tone fixture, warm brass with black, and that is the only finish combination it comes in. The body is brass base material in a contemporary style, so it reads as a warm gold accent against black hardware rather than a polished or antique brass.

It is a one-person install. The fixture weighs 1.4 lbs, so a standard wall-mounted junction box carries it without reinforcement. Wiring is 120V line voltage; the 21.75 inch body means you should confirm the box is centered where you want the fixture to land.

Yes. Lead is the listed Prop 65 chemical for this fixture, which matters if you are specifying for a California project and tracking disclosures. The fixture is also RoHS compliant.