NUVO Lighting 62-1734 Blink Pro, 11W, 7in, LED Fixture, Square Shape, 4000K, White Finish, 120/277V

Yes. The Blink Pro 62-1734 carries a wet location rating and is cETLus safety listed, so it can go over a tub or shower or on a covered exterior ceiling. It is catalogued as an indoor fixture, so treat it as suitable for wet-rated indoor spots like bathrooms and laundry rooms, and for protected ceilings rather than fully exposed open-air mounting.

It is a 120V/277V fixture, so the same part number works on standard 120V residential circuits and on 277V branch circuits in commercial buildings. That dual-voltage input is why this one gets specified for corridors, stairwells, and closets across a mixed-voltage facility without stocking two SKUs.

No can required. The 62-1734 is a surface ceiling-mount fixture measuring 7.00 x 7 x 0.67 inches, so it sits just over half an inch off the finished ceiling and mounts to a standard ceiling outlet box. At 1.06 lbs it is light enough for ordinary box support. The edge-lit construction is what keeps the profile that thin.

Fixed. The 62-1734 is not CCT selectable; it is a dedicated 4000K fixture. If you are matching existing 3000K or 5000K fixtures in the same space, order the Blink Pro in that color temperature instead, because there is no field switch on this one. 4000K is the neutral white usually specified for corridors, utility rooms, and commercial common areas.

Yes, the 62-1734 is dimmable. It uses an integrated LED driver rather than a replaceable lamp, so pair it with a dimmer rated for LED loads; a legacy incandescent dimmer with a high minimum load can cause flicker or drop-out with an 11 watt fixture.

No. The light source is an integrated LED with no socket and no serviceable lamp, rated for 50,000 average hours. For a property manager that is the tradeoff: no relamping trips and no bulb inventory, but the whole fixture gets swapped at end of life. At typical common-area run hours, 50,000 hours is many years of service.

The body is die-cast aluminum in a white finish, which gives better heat dissipation for the LED driver than a plastic housing and stands up to knocks in corridors, stairwells, and utility rooms. It is a utility-style square, so it reads as a clean flat panel rather than a decorative fixture.

The 62-1734 is RoHS compliant and cETLus safety listed. It also carries a California Prop 65 notice for lead, which is standard on many metal-bodied fixtures and is a disclosure requirement rather than an exposure in normal use. Institutional buyers specifying for schools or healthcare usually need both of those on file.

One: white. The 62-1734 is built as a white-finish fixture only, so if you need a different trim color you are looking at a different Blink Pro part number, not an option on this one.