PDQ Round Straight Pull (1B, 2C, 2D, 3D)

PDQ Round Straight Pull (1B, 2C, 2D, 3D)

Commercial Door Pulls, Single and Back to Back Mount

PDQ door pulls mount on the pull side of a door and come in round straight, flat straight, cast and offset pull handle styles, with center-to-center spacing from 5-1/2" up to 12" depending on the model.

Single pulls and back to back models are offered, with thru bolt, surface concealed and back to back mounting types for 1-3/4" metal, composite or wood doors and 1/2" glass doors. Pulls are often specified with a PDQ push plate on the opposite face so both sides of the door get matching hardware without lock trim.

Key Features

• Round straight pulls in 5/8", 3/4" and 1" diameters, plus 1" flat straight, cast and 1" round offset pull handle styles
• Single mount and back to back mount models
• ADA H3 models with 2-1/2" hand clearance for accessible operation
• Thru bolt mounting for metal, composite or wood doors, with decorative head options for wood, metal and glass doors
• Surface concealed mounting for metal doors (standard or rivnut) and for wood doors (knife thread insert)
• Heavy duty 5/16" fasteners available on select 1" diameter pulls
• Finish availability varies by model

Technical Specifications

• Door thickness: Mounting types for 1-3/4" metal/composite/wood doors and 1/2" glass doors
• Manufacturer Part Number: RSPULL

Available Options

• Finish: 630 - Satin Stainless Steel, 605 - Bright Brass, 606 - Satin Brass, 612 - Satin Bronze, 613E - Dark Oxidized Satin Bronze, 628 - Satin Aluminum
• Size: 5/8" Diameter, 5-1/2" CTC, 3/4" Diameter, 6" CTC, 3/4" Diameter, 8" CTC, 1" Diameter, 8" CTC
• Also selected when ordering: Mounting, Heavy Duty Fasteners

Each configuration has its own PDQ part number, for example 1B630.

Typical Applications

• Doors that do not need locking
• Interior doors
• Restrooms
• Storage rooms
• One-way traffic doors

Frequently Asked Questions

When should a pull be used instead of a lockset?
Push plates and pulls suit doors that do not need locking, such as interior doors, restrooms, storage rooms or one-way traffic doors where only an open and close function is required. PDQ pulls mount on the pull side and are often specified as a matched set with a push plate on the push side.

Does PDQ offer ADA pulls?
Yes. PDQ offers ADA-oriented options, including the H3 pull with 2-1/2" hand clearance for accessible operation. Recommended mounting follows ADA/ANSI A117.1 guidance, with pulls at 42" above finished floor and a minimum 4" clearance between the pull and the door stile.