PDQ 35STHB-EL Electrified 4 Ba...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$319.38

PDQ 35STHB-EL Electrified 4 Ball Bearing Heavy Weight Hinge, Steel

(No reviews yet) Write a Review

Model: 35STHB4545626NRPEL4
$319.38
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$319.38
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

PDQ 35STHB-EL Electrified 4 Ball Bearing Heavy Weight Hinge, Steel

PDQ EL Series Electrified Power Transfer Hinges

PDQ EL Series electrified hinges carry concealed wiring through the hinge knuckle, transferring power between the frame and the door for PDQ electrified locks, exit devices and trim. They are built on PDQ full mortise 2 ball bearing standard weight and 4 ball bearing heavy weight hinges in steel or stainless steel, and come standard with a non-removable pin.

The EL4 option carries 4 wires (two 20 gauge, two 26 gauge) for a single electrified function. The EL8 option carries 8 wires (28 gauge) to run multiple devices, such as a lock, a request-to-exit switch and a door position switch, through one hinge. ISMC versions of each add a Molex connector so installers can plug in leads instead of hard-wiring each conductor at the hinge.

Key Features

  • EL4 (4 wire) and EL8 (8 wire) concealed electric through-wire options
  • ISMC versions add a Molex connector for faster field termination
  • Tested to over 100,000 cycles
  • Certified to ANSI/BHMA A156.1-2013 and UL listed
  • Conforms with NFPA 80-2010, Section 6.4.3.1
  • Non-removable pin (NRP) standard
  • Packed with 12-24 x 1/2 inch machine screws and 12 x 1-1/4 inch wood screws
  • Five year limited warranty

Technical Specifications

  • ANSI/BHMA Function: A8111
  • Warranty: Five (5) year limited warranty
  • ANSI Standard: A156.1
  • Fasteners: All hinges packed with Machine Screws (12-24 x 1/2" FHMS) and Wood Screws (12 x 1-1/4" FHWS)
  • Packaging: 1 per carton
  • Materials: Steel: interior doors, non-corrosive environments. Stainless steel: exterior doors, corrosive environments
  • Mortise: Full mortise (series 35)
  • Listing: UL listed (EL Series Electrified Hinges)
  • Manufacturer Part Number: 35STHB-EL

Available Options

  • Finish: 600 - Primed for Painting, 605 - Bright Brass, 613E - Dark Oxidized Satin Bronze, 619 - Satin Nickel, 622 - Flat Black, 626 - Satin Chrome Plated Steel (BHMA 652 / US26D)
  • Size: 4-1/2" x 4-1/2", 5" x 4-1/2"
  • Security Option: Non-Removable Pin (standard)
  • Electrified Option: EL4 - Concealed electric through-wire (2 wires @ 20ga, 2 wires @ 26ga), EL8 - Concealed electric through-wire (8 wires, 28ga), EL4-ISMC - Concealed electric through-wire (2 wires @ 20ga, 2 wires @ 26ga) with Molex connector, EL8-ISMC - Concealed electric through-wire (8 wires, 28ga) with Molex connector

Each configuration has its own PDQ part number, for example 35STHB4545600NRPEL4.

Certifications

  • Conforms with NFPA 80-2010 Section 6.4.3.1
  • certified to ANSI/BHMA A156.1-2013 (select models and sizes)
  • UL listed: SH Series Spring Hinges and EL Series Electrified Hinges

Typical Applications

  • Steel hinges for interior doors and non-corrosive environments
  • Stainless steel hinges for exterior doors and corrosive environments
  • High-traffic commercial doors with electrified locks or exit devices

Frequently Asked Questions

What is the difference between the EL4 and the EL8?
The EL4 has 4 internal wires for a single electrified device. The EL8 has 8 wires to run multiple devices, such as a lock plus a request-to-exit switch plus a door position switch, through one hinge.

Can an EL Series hinge be used on a fire-rated door?
PDQ states the EL4 and EL8 are UL listed and conform to NFPA 80-2010 Section 6.4.3.1 for fire door hardware, in addition to ANSI/BHMA A156.1-2013.

Is there a version with a plug-in connector?
Yes. The EL4-ISMC and EL8-ISMC options add a Molex connector, so lock or strike leads plug in at the hinge instead of being hard-wired.

Manufacturer Resources

Product Specs

Department:
Door Hardware
Product Group:
Door Hinges and Pivots
Product Subgroup:
Electrified Hinges
Product Type:
Electrified Hinge
Product Category:
Hinges
Product Model:
35STHB-EL
Commercial/Residential:
Commercial
ANSI/BHMA:
A8111
Warranty:
Five (5) year limited warranty
Subcategory:
Hinges
Tags:
pdq 35sthb-el, 35sthb-el pdq, 35sthb-el

PDQ 35STHB4545626NRPEL4 – Frequently Asked Questions

1) What's the difference between the PDQ EL4 and EL8 electrified hinge options?
Wire count is the whole difference. The EL4 carries 4 conductors (two 20 gauge, two 26 gauge), enough for one electrified function such as an electric lock or electrified trim. The EL8 carries 8 conductors at 28 gauge, so you can run a lock plus a request-to-exit switch plus a door position switch through the same knuckle. If the opening has monitoring or signaling on top of the locking function, order the EL8 the first time; you can't add conductors later.
2) Can the PDQ 35STHB-EL electrified hinge go on a fire-rated door?
Yes. PDQ states the EL Series electrified hinges are UL listed and conform with NFPA 80-2010, Section 6.4.3.1, and are certified to ANSI/BHMA A156.1-2013. The ANSI/BHMA function is A8111. That's the paperwork a code official or AHJ will look for on a labeled opening.
3) Which size PDQ 35STHB-EL hinge do I need, 4-1/2 x 4-1/2 or 5 x 4-1/2?
The 35STHB-EL comes in 4-1/2 x 4-1/2 inch and 5 x 4-1/2 inch. The 4-1/2 inch leaf covers standard 1-3/4 inch commercial doors; the 5 inch height is used where the door is heavier or wider and the spec calls for more hinge leaf. All six finishes are offered in 4-1/2 x 4-1/2; the 5 x 4-1/2 is offered in 626 satin chrome.
4) Is the PDQ 35STHB-EL steel hinge OK on an exterior door?
No, not the steel version. PDQ specifies steel for interior doors and non-corrosive environments, and stainless steel for exterior doors and corrosive environments. For an exterior opening, a coastal site, a pool corridor or a kitchen, order the stainless steel EL hinge in the same 35 full mortise series rather than this steel one.
5) Do I need a separate power transfer device if I use this PDQ electrified hinge?
No. The 35STHB-EL carries the wiring concealed through the hinge knuckle, moving power from the frame into the door for PDQ electrified locks, exit devices and trim. That's the job an electric power transfer or door loop would otherwise do, so the hinge replaces it. You still need the frame-side wiring run and the device leads inside the door.
6) What does ISMC mean on a PDQ EL hinge, and is it worth ordering?
ISMC adds a Molex connector to the hinge leads, so the lock or strike wiring plugs in instead of each conductor being hard-wired at the hinge. Both wire counts offer it: EL4-ISMC and EL8-ISMC. If you're terminating a lot of openings or want a connection a tech can unplug for service, the ISMC version saves time in the frame. Hard-wired EL4 and EL8 are the non-connector versions.
7) What screws come with the PDQ 35STHB-EL hinge?
Each hinge ships one per carton with both fastener types: 12-24 x 1/2 inch flat head machine screws for hollow metal frames and prepped metal doors, and 12 x 1-1/4 inch flat head wood screws for wood doors and frames. So you don't need to source fasteners separately for either substrate.
8) Does the PDQ 35STHB-EL hinge have a non-removable pin for an outswing door?
Yes, NRP is standard on the EL Series, not an extra to specify. That matters on outswing doors where the hinge barrel is on the exterior side and a removable pin would let someone pull the door. The pin is also why the security option reads "Non-Removable Pin (standard)" on every configuration.
9) How durable is the PDQ 35STHB-EL for a high-traffic entry?
It's a 4 ball bearing heavy weight full mortise hinge tested to over 100,000 cycles, which is what puts it on high-traffic commercial doors carrying electrified locks or exit devices. The 2 ball bearing standard weight version of the EL Series is the lighter-duty option in the same family.
10) How do I write the PDQ part number for an electrified hinge order?
The number strings the options together: series, size, finish, NRP, then the electrified suffix. A 4-1/2 x 4-1/2 inch in 600 primed with the 4-wire option is 35STHB4545600NRPEL4. The same hinge with the Molex connector is 35STHB4545600NRPEL4ISMC, and a 5 x 4-1/2 inch in 626 with 8 wires is 35STHB5045626NRPEL8. Base model is 35STHB-EL.
11) What finishes does the PDQ 35STHB-EL electrified hinge come in?
Six: 600 primed for painting, 605 bright brass, 613E dark oxidized satin bronze, 619 satin nickel, 622 flat black, and 626 satin chrome plated steel (BHMA 652 / US26D). For matching a building already standardized on US26D hardware, 626 is the one. The 600 primed finish lets you paint hinges to match a painted frame.
How fast can I get the PDQ 35STHB4545626NRPEL4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the PDQ 35STHB4545626NRPEL4 come with a warranty?
Absolutely. The PDQ 35STHB4545626NRPEL4 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the PDQ 35STHB4545626NRPEL4?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the PDQ 35STHB4545626NRPEL4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.