PDQ Pull Plate with 1" Round S...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$82.80
PDQ Pull Plate with 1" Round Straight Pull, ADA

PDQ Pull Plate with 1" Round Straight Pull, ADA

(No reviews yet) Write a Review

Model: 863H3D630
$82.80
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$82.80
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

PDQ Pull Plate with 1" Round Straight Pull, ADA

PDQ 86 Series Commercial Pull Plates

PDQ 86 Series pull plates combine a 0.050 inch plate with an attached pull handle, giving the pull side of a door a solid grip point while protecting the door face from hand contact. Plates come in 3-1/2 x 15, 4 x 16, 6 x 16 and 8 x 16 inch sizes, paired with round straight, flat straight, cast or ADA H3 pulls.

PDQ makes its push plates and pulls in brass, bronze and Grade 304 stainless steel. Pull plates are typically specified on the exterior or pull face of a single-acting door and are often paired with a matching PDQ 96 Series push plate on the opposite side.

Key Features

  • 0.050 inch thick plate in four sizes, with 6 x 16 and 8 x 16 inch plates in 630 satin stainless steel only
  • Pull options include 5/8, 3/4 and 1 inch round straight pulls, 1 inch flat straight pulls and cast pulls
  • H3 ADA pulls offer 2-1/2 inch hand clearance for accessible operation
  • Optional cylinder or thumbturn prep for doors that also carry locking hardware
  • Through-bolt and surface concealed mounting types for metal, composite or wood doors
  • Plate mounts with #6 x 5/8 inch sheet metal screws

Technical Specifications

  • Thickness: 0.050"
  • Fasteners: #6 x 5/8 CH PH SMS
  • Plate sizes: 2 = 3-1/2" x 15", 3 = 4" x 16", 5 = 6" x 16" (630 only), 6 = 8" x 16" (630 only)
  • Manufacturer Part Number: 86-H3

Available Options

  • Finish: 630 - Satin Stainless Steel, 606 - Satin Brass, 613E - Dark Oxidized Satin Bronze
  • Size: 3-1/2" x 15" Plate, 8" CTC Pull, 4" x 16" Plate, 8" CTC Pull, 4" x 16" Plate, 10" CTC Pull, 4" x 16" Plate, 12" CTC Pull, 6" x 16" Plate, 8" CTC Pull, 6" x 16" Plate, 10" CTC Pull, 6" x 16" Plate, 12" CTC Pull, 8" x 16" Plate, 8" CTC Pull, 8" x 16" Plate, 10" CTC Pull, 8" x 16" Plate, 12" CTC Pull
  • Also selected when ordering: Prep for Locking Hardware, Handing, Mounting

Each configuration has its own PDQ part number, for example 862H3D630.

Typical Applications

  • Doors that do not need locking
  • Interior doors
  • Restrooms
  • Storage rooms
  • One-way traffic doors

Frequently Asked Questions

What is the difference between a push plate and a pull plate?
A push plate is a flat plate with no handle, mounted on the side of the door that is pushed open. A pull plate, such as the PDQ 86 Series, combines a plate with an attached pull handle so the door can be gripped and opened from that side.

Are PDQ pull plates ADA compliant?
PDQ offers the H3 pull with 2-1/2 inch hand clearance for accessible operation. PDQ notes that ADA/ANSI A117.1 guidance places pulls at 42 inches above the finished floor, with a minimum 4 inch clearance between the pull and the door stile.

Manufacturer Resources

Product Specs

Department:
Door Hardware
Product Group:
Push/Pull Hardware
Product Subgroup:
Door Pulls
Product Type:
Door Pull
Product Category:
Push/Pull Hardware
Product Model:
86-H3
Commercial/Residential:
Commercial
Subcategory:
Push and Pull Hardware
Tags:
pdq 86-h3, 86-h3 pdq, 86-h3

PDQ 863H3D630 – Frequently Asked Questions

1) Does the PDQ 86-H3 pull plate come in satin brass in all plate sizes?
No. The 86-H3 is offered in 606 satin brass and 613E dark oxidized satin bronze only on the smaller plates: the 3-1/2 x 15 inch plate with 8 inch CTC pull (862H3D606, 862H3D613E) and the 4 x 16 inch plate with 8 inch CTC pull (863H3D606, 863H3D613E). The 6 x 16 and 8 x 16 inch plates, and every 10 inch and 12 inch CTC pull, are 630 satin stainless steel only. If your building standard is brass or oxidized bronze, you are limited to those two 8 inch CTC combinations.
2) Is the H3 pull on the PDQ 86 Series an ADA accessible pull?
The H3 pull gives 2-1/2 inches of hand clearance between the grip and the plate, which is what makes it the accessible option in the PDQ 86 Series. PDQ's own guidance cites ADA/ANSI A117.1 for mounting the pull at 42 inches above finished floor with at least 4 inches of clearance between the pull and the door stile. Clearance is a product dimension; the 42 inch height and stile clearance are install conditions you control on site.
3) Which mounting type do I pick for a hollow metal door versus a wood door?
Five mounting choices are selected at order on the 86-H3. Type 1 thru bolt works on metal, composite or wood doors, as does Type 12 thru bolt with a decorative head. For concealed fastening on a hollow metal door, Type 6 requires door reinforcement by others, and Type 6R uses a Rivnut so no separate reinforcement is needed. For a wood door with no exposed fasteners, Type 8 uses a knife thread insert. Thru bolt is the default when you are not sure what is inside the door; surface concealed is the choice when the back face must stay clean.
4) Can a PDQ 86 pull plate be used on a door that also has a deadbolt or cylinder?
Yes. Cylinder prep and thumbturn prep are both order options on the 86-H3, so the plate can be cut to pass a cylinder or a thumbturn through the plate face instead of forcing you to mount the lock above or below it. Choose None if the door needs no locking hardware, which is the usual case for restroom, storage and one-way traffic doors.
5) Do I need a push plate on the other side of the door too?
A pull plate only serves the side you grip. The PDQ 86 Series is normally specified on the pull face of a single-acting door and paired with a matching 96 Series PDQ push plate, which is flat with no handle, on the push side. Order both if you want the door faces protected and the finish to match on both sides.
6) What material and thickness is the PDQ 86 pull plate, and will it hold up in a high traffic corridor?
Plate stock is 0.050 inch thick, made in brass, bronze or Grade 304 stainless steel depending on finish. The 630 satin stainless version is Grade 304, which is the one to standardize on for schools, healthcare corridors and other heavy hand-contact openings, and it is also the only material offered in the larger 6 x 16 and 8 x 16 inch plates that cover more of the door face.
7) Is handing something I have to specify on a PDQ 86-H3 pull plate?
Handing is one of the selections made when ordering the 86-H3, alongside mounting type and prep for locking hardware. It matters once the plate carries a cylinder or thumbturn prep, since the prep has to land on the correct side of the plate for your opening. Confirm the swing and which stile the plate sits against before you place the order.
8) Do PDQ 86 pull plates come with mounting screws?
The plate mounts with #6 x 5/8 inch combination head Phillips sheet metal screws. If you select one of the surface concealed mountings instead, the fastening changes with the type: Type 6 needs door reinforcement supplied by others, Type 6R uses a Rivnut, and Type 8 uses a knife thread insert in a wood door.
9) How do I read a PDQ 86 Series part number like 862H3D630?
The digits break down by option. 86 is the series, the next digit is plate size (2 = 3-1/2 x 15 inch, 3 = 4 x 16 inch, 5 = 6 x 16 inch, 6 = 8 x 16 inch), H3 is the ADA pull, the letter is pull CTC, and the trailing number is finish. So 862H3D630 is a 3-1/2 x 15 inch plate with an 8 inch CTC H3 pull in 630 satin stainless, and 866H3F630 is the 8 x 16 inch plate with a 12 inch CTC pull in the same finish.
How fast can I get the PDQ 863H3D630 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the PDQ 863H3D630 come with a warranty?
Absolutely. The PDQ 863H3D630 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the PDQ 863H3D630?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the PDQ 863H3D630 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!