You may also like
Pemko Full Mortise Heavy Duty Grade 1 Continuous Geared Hinge
Model: PMK-CFM/DFM
PEMKONNECT SERIES MODULAR HINGES
This modular hinge option is ideal for both new construction and retrofit applications, and is available with three Pemko Continuous Hinge models in 83" and 95"...
Pemko
Starting at
$238.00
$142.80
Select Hinges SL24 - Full Mortise Standard Duty Continuous Geared Hinge
Model: SL24-SD
MATERIAL: Extruded 6063 T6 aluminum alloy with selflubricating polyester thrust bearings.LENGTHS: 83", 85", 95" and 120" lengths standard for nominal door heights. Custom lengths are available.LOAD/
Select Hinges
Starting at
$149.00
$119.20
Select Hinges SL24 - Full Mortise Heavy Duty Continuous Geared Hinge
Model: SL24-HD
MATERIAL: Extruded 6063 T6 aluminum alloy with selflubricating polyester thrust bearings.LENGTHS: 83", 85", 95" and 120" lengths standard for nominal door heights. Custom lengths are available.LOAD/
Select Hinges
Starting at
$177.00
$141.60
Select Hinges SL57 - Full Surface Standard Duty Continuous Geared Hinge
Model: SL57
The SL57 full surface geared continuous hinge is a long-term, tamper-resistant solution for your high-traffic commercial entryways. Designed for retrofit or new construction applications,...
Select Hinges
Starting at
$206.00
$164.80
Pemko FM Series Full Mortise Continuous Geared Hinge Standard Duty
The FM Series Full Mortise Continuous Geared Hinge is designed for new door applications, and is available in standard, heavy, and extra heavy duty models. This hinge, which is applied to the frame rabbet and door edge to conceal both leaves, is also available in our PemKonnect® modular version that is primarily designed for freight savings and ease of transportation. Additional options include electric and hospital tip modification, and FirePins.
Features
-
Hinge is applied to the full length of the door to evenly distribute the door weight
-
Door gap is eliminated, increasing security and privacy
-
Inter-meshing gear segments provide greater bearing surface and extend life of the hinge
-
Assembly is anodized after all machining is done, resulting in a harder, longer-lasting hinge
-
Lengths can be cut in the field for a precise fit
-
PemKonnect® Modular Hinge option (-M)
- Packed in a 45" box
- Hinge segments fit together easily
- ANSI/BHMA A156.26 and UL certified
- Equal number of bearing as a traditional continuous hinge
- Can be cut in field
-
Special hinge reinforcements are not required. Hollow metal door and frame manufacturers’ standard is acceptable. Removal of hinge reinforcements in the door and frame is not advised
Benefits
-
PemKonnect Modular option
- Easy to transport + decrease in freight damage, shipping costs, storage space
- No extra tools needed for assembly
- Meets building construction and fire code requirements
- Supports the same weight requirements
- Easily modified for custom lengths
Specifications
-
Grade: Grade 1
-
Hinge Material: Aluminum
-
Hinge Mounting Type: Full Mortise
-
Hinge Strength: Heavy Weight
-
Handing: Non-handed
-
Fastener: Teks
-
Fastener Type: Self Drilling
-
Maximum Door Thickness: 1 3/4"
-
Minimum Door Thickness: 1 3/4"
-
Maximum Door Width: 4'
-
Maximum Hinge Length: 10'
-
Minimum Length: 79"
-
Maximum Swing: 180°
-
Minimum Hinge Clearance: 5/16"
-
Weight: 1.14lbs. per foot
-
Product Note: **Door edge must be square on hinge side. For beveled edge doors, additional clearances are required.**
Certifications
-
Environmental Product Declaration (EPD)
-
Health Product Declaration (HPD)
-
UL 10C - Standard for Positive Pressure Fire Tests of Door Assemblies
-
ANSI/BHMA Standard A156.26
RESOURCES & DOWNLOADS
Pemko FM Series Installation Instructions
- Brand:
- Pemko
- Category:
- Door Hinges and Pivots
- Subcategory:
- Continuous Hinges
- Product Group:
- Door Hinges and Pivots
- Product Subgroup:
- Continuous Hinges
- Product Type:
- Pin and Barrel Continuous Hinges
- Model:
- Full Mortise Hinges