You may also like
FM300 Series
The Markar FM300 Series Full Mortise Continuous Pin and Barrel Hinge is edge-mounted and used on high traffic, high abuse doors. This hinge is ideal in locations that would normally call out for anchor hinges, pivot reinforcement hinges or thrust pivot unit and hinge sets. Additionally, this hinge saves on special door and frame preparation charges and can be used on both fire labeled and non-labeled openings.
Features
-
Used for high traffic, high abuse doors
-
Exterior barrel diameter .438" (7/16")
-
Fasteners are concealed when door is closed
-
Screw pack includes custom 12-24 x 11/16 S.S Phillips flat head Undercut TEK Screws
-
Specify handing for optional features listed
-
Custom lengths available
-
Hinges are furnished with hardware pack per specific model application
-
Symmetrically templated hole pattern
Benefits
-
Provides full height door support
-
Saves on special door and frame preparation charges
-
Can be used on both fire labeled and non-fire labeled openings
-
Each knuckle includes nylon bearings for a quiet, smooth, self-lubricating operation
-
Used instead of anchor hinges, pivot reinforcement hinges, thrust pivot units
-
Easy installation
-
Guaranteed for the life of the opening against defects in material or workmanship
Specifications
-
Grade: Grade 1
-
Hinge Material: 304 stainless steel
-
Hinge Mounting Type: Full Mortise
-
Hinge Strength: Standard Weight
-
Handing: Non-handed
-
Fastener: KMPSS
-
Fastener Type: TEKS
-
Maximum Door Thickness: 2 1/4"
-
Minimum Door Thickness: 1 3/4"
-
Maximum Door Width: 4"
-
Maximum Hinge Length: 10"
-
Minimum Hinge Length: 12"
-
Maximum Swing: 180°
-
Minimum Hinge Clearance: 1/4"
-
Weight: 2lbs. per foot
Certifications
-
ANSI/SDI 250.13 Certified
-
ASTM E330 Certified
-
Environmental Product Declaration (EPD)
-
UL 10C - Standard for Positive Pressure Fire Tests of Door Assemblies
-
Warnock Hersey listing
-
ASTM E1996 Certified
-
ASTM E1886 Certified
-
Florida Building Code Approved TAS 201, 202, 203 (old)
-
ANSI/BHMA Standard A156.26
-
ANSI/BHMA Standard A156.26 Grade 1
RESOURCES & DOWNLOADS
Manufacturer Resources
Product Specs
- Category:
- Door Hinges and Pivots
- Subcategory:
- Continuous Hinges
- Grade:
- Grade 1
- Product Group:
- Door Hinges and Pivots
- Product Subgroup:
- Continuous Hinges
- Product Type:
- Continuous Pin and Barrel Hinges
- Model:
- FM300