Philips Lighting 913701252402 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$150.07
$78.67
Philips Lighting 913701252402 OPTANIUM 2-Lamp F32T8 Electronic Fluorescent Ballast, 120-277V Program Start

Philips Lighting 913701252402 OPTANIUM 2-Lamp F32T8 Electronic Fluorescent Ballast, 120-277V Program Start

(No reviews yet) Write a Review

Model: 913701252402
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$150.07
$78.67
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Philips Lighting 913701252402 OPTANIUM 2-Lamp F32T8 Electronic Fluorescent Ballast, 120-277V Program Start

The Philips Lighting OPTANIUM IOP2S32SCSD35M is an electronic fluorescent ballast built to drive 2 F32T8 lamps rated at 32W each in a series lamp connection. Engineered for 120-277V input at 50-60Hz, this program-start ballast delivers a 1.5s ignition time, a 0.98 nominal power factor, and CSA certificate approval for dependable performance in commercial fluorescent fixtures.

Key Features

  • Lamp Compatibility: Drives 2 F32T8 fluorescent lamps rated at 32W each in a series lamp connection.
  • Programmed Start Ignition: 1.5s nominal ignition time with automatic restart for extended lamp life.
  • Universal Voltage Input: Accepts 120-277V input at 50-60Hz, with nominal input power of 56W and input current from 0.21A to 0.47A.
  • High Power Quality: 0.98 nominal power factor, 0.87 ballast factor, and 10% total harmonic distortion for efficient operation.
  • Metal SC Housing: Compact metal housing measures 9.5" x 1.7" x 1.18" for streamlined installation in fixture channels.

Certifications & Compliance

  • CSA Certificate Approval Mark
  • Suitable for Outdoor Use

Technical Specifications

  • Automatic Restart: Yes
  • Color Input Terminals: No terminals
  • Color Output Terminals: No terminals
  • Connector Type: No connector
  • Crest Factor (Nom): 1.6
  • EAN/UPC: 7.81087E+11
  • EMC Immunity Standard: FCC Non-Consumer
  • Housing Type: SC
  • Hum and Noise Level: A
  • Material Nr (12NC): 9.13701E+11
  • Max Ballast-Lamp Distance (Remote Wiring): 7'
  • Max Ballast-Lamp Distance (Tandem Wiring): Any = 7'
  • Max Ballast-Lamp Distance (Through Wiring): Any = 7'
  • Net Weight (Piece): 441.000 g
  • Packs Per Outer Box: 20
  • Quantity Per Pack: 1
  • Order Code: 9.13701E+11
  • Remote Wiring Configuration Allowed: Yes
  • Suitable for Outdoor Use: Yes
  • Tandem Wiring Configuration Allowed: Yes
  • Through Wiring Configuration Allowed: Yes
  • Total Harmonic Distortion (USA): 10%
  • UL Recognized: No
  • Wire Gauge (Nom): 18AWG mm
  • Wire Length by Color: See data sheet
  • Wire Strip Length: 0.50/0.375 mm
  • Wire Type: Solid

Typical Applications

  • Commercial and Industrial Fluorescent Fixture Retrofits
  • Outdoor and Weather-Exposed Fixture Applications
  • New Construction and Renovation Lighting Projects
  • Remote, Tandem, and Through-Wired Fixture Installations

Why Philips Lighting?

Philips Lighting engineers the OPTANIUM series with a metal SC housing, programmed-start ignition, and CSA certificate approval to deliver dependable performance in demanding commercial environments. With flexible remote, tandem, and through wiring support plus a high 0.98 power factor, this ballast is built for code-compliant fluorescent lighting systems.

Manufacturer Resources

Product Specs

Approval Marks:
CSA certificate
Automatic Restart:
Yes
Ballast Factor Nom :
0.87
Ballast Type:
Electronic Fluorescent
Base Model:
IOP2S32SCSD
Color Input Terminals:
No terminals
Color Output Terminals:
No terminals
Connector Type:
No connector
Crestfactor Nom :
1.6
Ean Upc Product:
7.81087E+11
Emc Immunity Standard:
FCC Non-Consumer
Housing Dimensions:
9.5" x 1.7" x 1.18"
Housing Material:
Metal
Housing Type:
SC
Hum And Noise Level:
A
Ignition Method:
Programmed Start
Ignition Time Nom :
1.5 s
Input Current Max :
0.47 A
Input Current Min :
0.21 A
Input Frequency:
50 to 60 Hz
Input Power Nom :
56-56 W
Input Voltage:
120 to 277 V
Lamp Connection:
Series
Lamp Type:
F32T8
Material Nr 12nc :
9.13701E+11
Max Ballast Lamp Distance Remote Wiring:
7'
Max Ballast Lamp Distance Tandem Wiring:
Any = 7'
Max Ballast Lamp Distance Through Wiring:
Any = 7'
Net Weight Piece :
441.000 g
Number Of Lamps:
2 piece/unit
Numerator Packs Per Outer Box:
20
Numerator Quantity Per Pack:
1
Order Code:
9.13701E+11
Order Product Name:
OPTANIUM IOP2S32SCSD35M
Power Factor Nom :
0.98
Rated Lamp Power:
32 W
Remote Wiring Configuration Allowed:
Yes
Suitable For Outdoor Use:
Yes
T Case Maximum Nom :
70 °C
Tandem Wiring Configuration Allowed:
Yes
Through Wiring Configuration Allowed:
Yes
Total Harmonic Distortion Usa:
10%
Ul Recognized:
No
Wire Gauge Nom :
18AWG mm
Wire Length By Color:
See data sheet
Wire Striplength:
0.50/0.375 mm
Wire Type:
Solid
Product Type:
Fluorescent Ballast
Department:
Electrical

Philips Lighting 913701252402 – Frequently Asked Questions

1) Will the Philips OPTANIUM IOP2S32SCSD35M ballast run on both 120V and 277V circuits?
It accepts any input from 120 to 277 volts at 50 to 60 Hz, so the same ballast works on a 120V branch circuit or a 277V commercial feed with no model change. Input current runs 0.21A at the high-voltage end up to 0.47A at 120V, and nominal input power is 56W driving two lamps. That universal range is why facilities crews stock one part number across mixed-voltage buildings.
2) How many lamps and what lamp type does this Philips OPTANIUM ballast drive?
Two F32T8 lamps rated 32W each, wired in a series lamp connection. It is a two-lamp ballast only, so a four-lamp troffer needs two of them and a single-lamp fixture needs a one-lamp model instead. Because the lamps are in series, both tubes are driven off the same circuit.
3) Will this ballast fit in the wireway of a standard fluorescent troffer?
The metal SC-type housing measures 9.5 x 1.7 x 1.18 inches, which is the standard small-can footprint most F32T8 strip and troffer channels are punched for. Piece weight is 441 grams. Check your existing can's mounting hole spacing against the new one before you pull the old ballast.
4) Why choose a program-start ballast like this over an instant-start one?
Program start preheats the lamp cathodes before striking the arc, which is what you want in any space where lights are switched frequently or run on occupancy sensors, because instant start shortens lamp life under heavy switching. The OPTANIUM IOP2S32SCSD35M has a 1.5 second nominal ignition time and automatic restart, so it relights on its own after a lamp swap or a power blip. In a space where the lights stay on all shift, instant start is the cheaper approach; on sensor-controlled offices, restrooms and stairwells, program start is the right call.
5) Can I tandem-wire or remote-mount this Philips F32T8 ballast?
Remote, tandem and through wiring are all permitted, with a maximum ballast-to-lamp distance of 7 feet in every one of those configurations. That covers tandem-wiring two 4-foot strips off one ballast or mounting the ballast away from the lampholders in a cove or sign box, as long as you stay inside the 7 foot run.
6) Can this ballast be used in an outdoor or unheated fixture?
It is rated suitable for outdoor use, in a metal housing, with a maximum case temperature of 70 C. That covers weather-exposed and canopy fixtures where the ballast is enclosed in the fixture housing. Mind the 70 C case limit in hot, tightly enclosed fixtures such as sign cabinets in direct sun.
7) What wire and connections come on this ballast, and do I need connectors?
Leads are 18 AWG solid wire and there are no factory terminals or connectors on either the input or output side, so you make up the joints yourself with wire nuts or push-in connectors. Strip length is 0.50/0.375. Buy the connectors separately; none are included.
8) What is the correct Philips part number and base model to order for a 2-lamp F32T8 program start ballast?
The order product name is OPTANIUM IOP2S32SCSD35M, built on the IOP2S32SCSD base model. Quote that designation to your spec writer or facilities engineer when matching an existing ballast; the base model tells you it is a 2-lamp series F32T8 unit and the suffix identifies the specific 120-277V program-start build.
9) How is the OPTANIUM IOP2S32SCSD35M packaged for a multi-fixture job?
Each pack holds one ballast, and an outer carton holds 20 packs. For a re-ballast covering 40 two-lamp troffers you would be ordering two full cartons.
How fast can I get the Philips Lighting 913701252402 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Philips Lighting 913701252402 come with a warranty?
Absolutely. The Philips Lighting 913701252402 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Philips Lighting 913701252402?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Philips Lighting 913701252402 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!