SATCO Lighting S9624 9.5W, BR3...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$5.50
Satco Lighting SAT-S9624 9.5 Watt - BR30 LED - 105 deg. Beam Angle - 2700K - GU24 base - 120 Volt - Dimmable

SATCO Lighting S9624 9.5W, BR30 LED, 105 degree Beam Angle, 2700K, GU24 Base, 120V, Dimmable

(No reviews yet) Write a Review

Model: S9624
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$5.50
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S9624 9.5W, BR30 LED, 105 degree Beam Angle, 2700K, GU24 Base, 120V, Dimmable

9.5 Watt - BR30 LED - 105 deg. Beam Angle - 2700K - GU24 base - 120 Volt - Dimmable

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.079A
Avg Rated Hours:
25000
Burning Position:
Universal
CA T20 Alt Sub:
S9626
CA Web Text:
Non-Compliant
CCT Selectable:
No
CRI:
80
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Open Rated Lamp
FCC Compliant:
Yes
Housing Color:
Gray
Lamp Base:
Bi Pin GU24
Lamp Filament:
LED
Lamp Shape:
BR30
Lens Finish:
Frost
Lensed:
Yes
Lumens:
750L
Product Type:
Reflector
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
5 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
65W
Location Rating:
Damp
Location Indoor/ Outdoor:
Indoor
Product Voltage:
120V
Beam Spread Angle:
105
Light Temperature:
2700K
Product Category:
Light Bulbs
Product Wattage:
9.5W
Product Weight:
0.29 lb

Satco Lighting S9624 – Frequently Asked Questions

1) Can I use this Satco GU24 BR30 in a fully enclosed recessed fixture or an airtight can?
No. The S9624 is an open rated lamp, so it needs a fixture that lets heat escape. Putting it in a sealed enclosure or an airtight IC can traps heat and shortens life. For enclosed housings, pick a lamp specifically marked enclosed rated.
2) Is the Satco S9624 BR30 approved for sale in California?
No. The S9624 is flagged non-compliant for California Title 20, and Satco lists the S9626 as the California alternate substitute. If the job is in California, order the S9626 instead.
3) What incandescent BR30 does this 9.5W LED replace, and will the room look as bright?
It replaces a 65W incandescent BR30, putting out 750 lumens at 9.5 watts. Color is 2700K, the warm white most people associate with the old incandescent flood, with a CRI of 80. Swapping fleet-wide gives roughly the same light for about a seventh of the draw (0.079 amps per lamp at 120V).
4) Does this Satco BR30 LED dim, and can I run it on my existing wall dimmer?
The S9624 is a dimmable lamp on 120V line voltage. It is not a three-way lamp, so it will not step through a three-way socket. Standard practice with dimmable LED is a dimmer rated for LED loads; older high-wattage incandescent dimmers often flicker or buzz at the very low load an LED lamp presents.
5) Can I put this BR30 in a bathroom, over a shower, or on a covered porch?
Bathrooms and covered, protected areas are fine: the S9624 carries a damp location rating. It is listed as an indoor lamp, so it is not for open weather exposure or anywhere it can be hit by rain or spray. For an exposed exterior can, use a wet-location rated lamp.
6) Can this Satco BR30 be installed base-up in a can or sideways in a wall sconce?
Any orientation works. Burning position is universal, so base-up in a recessed can, base-down in a pendant, or horizontal in a sconce are all acceptable.
7) How long does the Satco S9624 last before a maintenance crew has to relamp?
Rated average life is 25,000 hours. In a common-area fixture running about 12 hours a day that is roughly five and a half years between relamps, which is why property managers standardize on LED BR30s in stairwells and corridors rather than incandescent floods.
8) Is this Satco LED lamp DLC listed for a utility rebate?
No. The S9624 is not DLC approved, so it will not qualify under rebate programs that require a DesignLights Consortium listing. It is FCC compliant for radio interference.
9) Does this bulb change color temperature, or is it fixed at 2700K?
Fixed. The S9624 is not CCT selectable; it is 2700K warm white only. If you are matching existing lamps in a building, everything on that circuit needs to be 2700K or the difference will show.
How fast can I get the Satco Lighting S9624 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9624 come with a warranty?
Absolutely. The Satco Lighting S9624 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9624?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9624 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!