Milwaukee Tool 48-25-2562 Selfeed Bit 2-9/16"

Milwaukee 48-25-1502 1-1/2" Self-Feed Wood Bit

The Milwaukee 48-25-1502 1-1/2" Self-Feed Wood Bit is a self-feeding wood boring bit engineered to cut clean, precise 1-1/2" diameter holes through wood framing. Built as part of Milwaukee's 48-25 self-feed bit lineup, this bit is commonly used by electricians, plumbers, and general contractors to bore holes through studs and joists when routing cable, conduit, and pipe. The integrated self-feed screw tip pulls the bit into the workpiece, reducing the push force required from the operator and helping maintain a consistent feed rate for faster, cleaner holes. Self-feed bits like the 48-25-1502 are a staple in trade toolboxes because they combine large-diameter cutting capability with a feed mechanism that keeps the bit tracking straight, helping installers move quickly from stud to stud without repositioning or excessive force.

Key Features

• Trade Size: 1-1/2" diameter bit sized for boring holes through wood studs and joists to route cable, conduit, or pipe.
• Self-Feed Screw Tip: An integrated feed screw pulls the bit through the wood, reducing the forward pressure the operator has to apply and helping keep the feed rate consistent.
• Milwaukee 48-25 Series: Model 48-25-1502 is part of Milwaukee's 48-25 self-feed bit lineup, built for professional wood-boring applications on the job site.
• Wood Boring Application: Purpose-built for drilling clean, accurately sized holes through dimensional lumber, framing members, and engineered wood products.
• Trade-Ready Sizing: The 1-1/2" diameter is a common size electricians and plumbers rely on when routing cable, conduit, and pipe through framing during rough-in work.
• Consistent Boring Performance: The self-feed screw tip helps keep the bit centered and tracking straight as it bores through the workpiece.
• Job-Site Durability: Designed as part of Milwaukee's professional self-feed bit lineup for repeated use on framing and rough-in tasks.

Technical Specifications

• Refer to manufacturer documentation for complete technical specifications.

Typical Applications

• Electrical Rough-In Wiring Through Studs and Joists
• Plumbing Pipe and Conduit Routing Through Framing
• Wood Framing and Structural Boring
• HVAC and Low-Voltage Cable Pathways
• Drilling Access Holes for Wire and Cable Bundles
• Renovation and New Construction Trade Work

Why Milwaukee?

Milwaukee builds its 48-25 self-feed bit series for the demands of daily professional use, where consistent hole quality and dependable performance directly affect job-site productivity. The self-feed design on the 48-25-1502 is engineered to help tradespeople bore 1-1/2" holes through wood framing quickly and with less physical effort than a standard boring bit. Choosing Milwaukee means outfitting your crew with tooling built specifically for the rigors of electrical, plumbing, and general construction rough-in work. Backed by the Milwaukee name, the 48-25-1502 gives professionals a purpose-built option for boring the large-diameter holes that electrical, plumbing, and framing work require day in and day out.