Klein Tools 6233 #0 Phillips P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$61.23
$11.23
Klein Tools 6233 #0 Phillips Precision Screwdriver, 3-Inch Shank

Klein Tools 6233 #0 Phillips Precision Screwdriver, 3-Inch Shank

(No reviews yet) Write a Review

Model: 6233
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$61.23
$11.23
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
#0 Phillips Precision Screwdriver, 3-Inch Shank

  • Features

    • Nickel chrome plating rust prevention
    • Cushion-Grip™ handle for maximum comfort when working on small equipment
    • #0 Phillips screwdriver with 3-Inch steel blade for long lasting durability
    • Precision Screwdriver features rotating cap for optimum and precise control
    • Rotating Cap, Cushion-Grip™ Handle
    • Color coded ring for easy spotting of each tip type
    • Over-sized cap marking for quick identification of tip size
    • Heat treated and precision-machined tip for greater strength

  • Warnings

    • Do NOT use to pry or chisel.
    • NOT insulated. Will NOT protect against electrical shock.
    • Always wear approved eye protection.


6233 - spec sheet

Manufacturer Resources

Product Specs

Color Code:
Red
Handle Color:
Black/Yellow
Handle Diameter:
0.55" (1.4 cm)
Handle Length:
3.5" (8.9 cm)
Handle Material:
CA/TPE
Insulated:
No
Magnetic:
No
Overall Height:
0.71" (1.8 cm)
Overall Length:
6.5" (16.51 cm)
Overall Width:
0.71" (1.8 cm)
Shank Length:
3" (7.6 cm)
Shank Type:
Phillips
Tip Size:
#0
Tip Type:
Phillips
Department:
Electrical
Product Group:
Hand Tools
Product Subgroup:
Screwdrivers & Drivers
Product Type:
Phillips Screwdriver
Product Details:
Phillips Screwdriver
Product Height:
2.5500 in
Product Material:
S2 Steel
Product Weight:
0.0700 lbs
Product Width:
3.0000 in
Product Depth:
6.5000 in

Klein Tools 6233 – Frequently Asked Questions

1) Can I use the Klein Tools 6233 precision screwdriver on live electrical circuits?
No. The Klein 6233 is not insulated and will not protect against electrical shock, so keep it off energized work. For live circuits you need a screwdriver rated and marked as insulated. The 6233 is a bench and device-level driver for de-energized small equipment.
2) What size screws does a #0 Phillips precision screwdriver actually fit?
The 6233 carries a #0 Phillips tip, which is the small end of the Phillips range, used on things like thermostat covers, low-voltage device terminals, electronics enclosures and small appliance screws. If you're driving standard device or cover-plate screws in a junction box, that's #1 or #2 territory and this tip will cam out.
3) How long is the Klein 6233 overall, and will it reach into a recessed housing?
Shank length is 3 inches with an overall length of 6.5 inches, so you get 3 inches of reach past the handle. The handle itself is 3.5 inches long and 0.55 inches in diameter, which is what lets you spin it between thumb and fingers rather than gripping it in a fist.
4) Is the tip on the Klein 6233 magnetic for holding small screws?
It isn't. The 6233 has a non-magnetic tip, so a tiny #0 screw won't stick to it. If you're working overhead or dropping screws into a chassis, plan on a magnetizer or a parts tray.
5) What is the rotating cap on this precision screwdriver for?
It lets you hold the cap steady with one fingertip while your other fingers turn the handle, so the driver stays square to the screw and you control torque precisely. That's the working difference between a precision driver like the 6233 and an ordinary small Phillips driver, and it matters on delicate terminals where over-torquing strips the head.
6) How do I tell this one apart from the other precision drivers in the set at a glance?
Klein color-codes these by tip type, and the 6233 carries a red ring. The cap is also over-sized and marked with the tip size, so #0 reads off the end while the drivers are standing in a rack or a pouch. Handle is black and yellow.
7) What is the blade made of, and will it hold up in a damp service van?
The blade is S2 steel with nickel chrome plating for rust prevention, and the tip is heat treated and precision machined. The handle is a CA/TPE Cushion-Grip. One caution from Klein: don't pry or chisel with it, since a #0 precision blade is made for turning, not leverage.
How fast can I get the Klein Tools 6233 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 6233 come with a warranty?
Absolutely. The Klein Tools 6233 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 6233?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 6233 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!