Spears PVC Socket Gate Valve, ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$86.79
Spears PVC Socket Gate Valve, Buna-N Seals

Spears PVC Socket Gate Valve, Buna-N Seals

(No reviews yet) Write a Review

Model: 2012-015

In Stock (leaves warehouse same day if ordered before 3pm ET)

$86.79
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Spears PVC Socket Gate Valve, Buna-N Seals

The Spears PVC Socket Gate Valve, Buna-N Seals delivers reliable on/off flow control for PVC piping systems. Constructed from durable PVC with Buna-N seals, this gate valve is engineered for solvent-weld socket connections, providing a secure, leak-resistant joint without the need for threading or specialty tools. Built for dependable shutoff performance, it is a practical choice for residential, commercial, agricultural, and irrigation piping applications where corrosion resistance and long service life are priorities. As part of a trusted line of PVC valves, it is designed to integrate cleanly into new construction and retrofit piping projects alike.

Key Features

  • Socket Connection: Solvent-weld socket ends create a secure, leak-resistant joint for PVC piping systems.
  • Durable PVC Construction: Rigid PVC body resists corrosion and chemical attack, supporting long-term reliability in demanding piping runs.
  • Buna-N Seals: Buna-N (nitrile) seals provide consistent, dependable sealing performance for reliable shutoff.
  • Gate Valve Design: Full-port gate design allows unrestricted flow when fully open and positive shutoff when closed.
  • Lightweight, Easy Installation: PVC construction is lighter and easier to handle and install than comparable metal gate valves.
  • Chemical-Resistant Body: PVC material stands up to a wide range of fluids commonly found in plumbing and irrigation systems.
  • Non-Corrosive Performance: Unlike metal gate valves, the PVC body will not rust or corrode in wet or chemically exposed environments.
  • Low-Maintenance Operation: Simple gate mechanism is straightforward to operate and requires minimal upkeep over its service life.

Technical Specifications

  • Product Type: Valve
  • Department: Plumbing
  • Product Group: PVC & CPVC Fittings
  • Connection Type: Socket (Solvent-Weld)
  • Seal Material: Buna-N
  • Body Material: PVC

Typical Applications

  • Residential and Commercial Plumbing Systems
  • PVC Piping and Distribution Lines
  • Irrigation and Agricultural Water Systems
  • Pool and Spa Plumbing Systems
  • Chemical and Process Piping for PVC-Compatible Fluids
  • New Construction and Piping System Retrofits

Why Spears?

Spears is a well-established manufacturer of PVC and CPVC piping system products, recognized for durable construction and consistent manufacturing quality. This PVC Socket Gate Valve with Buna-N seals reflects that standard, giving plumbing professionals and contractors a dependable shutoff solution built to perform reliably in PVC piping systems across plumbing, irrigation, and light industrial applications. Choosing Spears means specifying a valve built from corrosion-resistant PVC with quality seal materials, backed by a manufacturer trusted throughout the plumbing and piping industry for consistent, code-oriented product design.

Manufacturer Resources

Thermoplastic Gate Valves

Product Specs

Product Type:
Valve
Department:
Plumbing
Product Group:
PVC & CPVC Fittings
Product Material:
PVC
Connection Type:
Socket
Product Subgroup:
Fittings and Valves

Spears 2012-015 – Frequently Asked Questions

1) What sizes does the Spears 2012 PVC socket gate valve come in?
Two sizes: 1-1/2 inch (part 2012-015) and 2 inch (part 2012-020). Both are socket ends, so the size refers to the PVC pipe OD the socket accepts.
2) Do I need to thread this Spears gate valve, or does it solvent weld?
It solvent welds. The 2012 gate valve has socket ends, so you prime and cement it to PVC pipe the same way you would a coupling. No threading, no tape, no specialty tools. If your run is threaded pipe, you will need a male adapter on each side to transition into the socket.
3) Can I use a PVC gate valve for throttling flow, or only full open and closed?
Use it for on/off service only. A gate valve seals positively when closed and gives unrestricted flow through the full port when fully open, but partially open gates wear the seat and chatter. If you need to regulate flow rather than isolate it, specify a ball valve or a butterfly valve instead.
4) Are Buna-N seals OK for pool and irrigation water?
Yes. The 2012 uses Buna-N (nitrile) seals, which is the standard elastomer for water service and is what Spears specifies here for plumbing, irrigation and pool/spa piping. For chemical service, confirm the specific fluid is compatible with both PVC and nitrile before you install it.
5) Will a PVC gate valve hold up better than a brass one in an irrigation box?
In wet or chemically exposed ground, yes on the corrosion side. The body is PVC, so it will not rust or corrode the way a metal gate valve does in a buried box or a chlorinated environment. It is also lighter to handle and set in line. The tradeoff is that PVC does not take mechanical abuse or high temperature the way metal does, so keep it out of traffic paths and off hot lines.
6) Can I replace a section of existing PVC line with this valve without recutting the whole run?
You can, but plan the joint. Because both ends are solvent-weld sockets, a mid-run installation needs enough slack or a repair coupling to slide the valve into place, exactly like splicing in a fitting. Cut square, deburr, dry fit both sockets, then cement. It is sold for both new construction and retrofit work in 1-1/2 and 2 inch PVC.
7) What is the exact Spears part number for the 2 inch socket gate valve?
2012-020 is the 2 inch. The 1-1/2 inch is 2012-015. The 2012 prefix is the PVC socket gate valve with Buna-N seals, so quoting the full number keeps you off the threaded or CPVC versions of the same series.
How fast can I get the Spears 2012-015 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Spears 2012-015 come with a warranty?
Absolutely. The Spears 2012-015 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Spears 2012-015?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Spears 2012-015 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!