Spears Schedule 80 PVC Socket ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$29.13
Spears Schedule 80 PVC Socket Wye Fitting

Spears Schedule 80 PVC Socket Wye Fitting

(No reviews yet) Write a Review

Model: 875-015

In Stock (leaves warehouse same day if ordered before 3pm ET)

$29.13
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Spears Schedule 80 PVC Socket Wye Fitting

The Spears Schedule 80 PVC Socket Wye Fitting is engineered for pressurized PVC piping systems that require a reliable, low-turbulence branch connection point. Constructed from durable Schedule 80 PVC with solvent-weld socket (SOC) ends on all three ports, this wye fitting carries a 235PSI pressure rating and is available in a 1-1/2" trade size to match standard Schedule 80 pipe and fitting runs. Its angled branch geometry reduces flow turbulence and pressure loss compared to a straight 90-degree tee, making it well suited for industrial, commercial, irrigation, and municipal piping networks where dependable, code-compliant performance is required day in and day out. Spears manufactures this wye fitting to consistent dimensional tolerances so it mates cleanly with other Schedule 80 PVC components for a tight, dependable solvent-welded system.

Key Features

  • Trade Size: 1-1/2" for standard Schedule 80 PVC pressure piping runs and branch takeoffs.
  • Durable Construction: Schedule 80 PVC body resists corrosion, chemical exposure, UV degradation, and impact damage in demanding indoor and outdoor environments.
  • Socket Connection: Solvent-weld socket (SOC) ends on all ports provide a permanent, leak-resistant joint when properly primed and cemented.
  • Pressure Rating: Rated to 235PSI, supporting demanding pressurized piping applications where reliability under load is critical.
  • Wye Configuration: Angled branch design minimizes turbulence, water hammer, and pressure loss compared to a 90-degree tee fitting.
  • Chemical Resistance: PVC construction stands up to a wide range of process chemicals, acids, and caustic solutions commonly found in industrial piping.
  • Packaging: Supplied 20 pieces per carton for efficient job-site stocking, distribution, and inventory management.

Technical Specifications

  • Size: 1-1/2"
  • Pressure Rating: 235PSI
  • Schedule: Schedule 80
  • Connection Type: Socket (SOC)
  • Packaging: 20 ea
  • Product Type: PVC Fitting
  • Department: Plumbing
  • Product Group: PVC & CPVC Fittings

Typical Applications

  • Industrial and Commercial PVC Pressure Piping Systems
  • Chemical Processing and Waste Handling Lines
  • Irrigation and Water Distribution Networks
  • Branch Connections in Schedule 80 Piping Runs
  • Municipal and Wastewater Treatment Piping
  • Renovation and New Construction Plumbing Projects

Why Spears?

Spears is a trusted manufacturer of Schedule 80 PVC piping components engineered for pressurized industrial, commercial, and municipal systems. This socket-style wye fitting combines corrosion-resistant PVC construction with a 235PSI pressure rating, delivering dependable, long-lasting performance for professional pressure piping installations. Backed by consistent manufacturing quality, Spears fittings help contractors and facility managers build piping systems that hold up to years of demanding service.

Product Specs

Product Size:
1-1/2
Product Type:
Wye Fitting
Department:
Plumbing
Product Group:
PVC & CPVC Fittings
Product Material:
PVC
Connection Type:
Socket
Configuration:
Schedule 80
Product Subgroup:
Fittings and Valves

Spears 875-015 – Frequently Asked Questions

1) Will the Spears 8750-15 wye fitting glue onto standard 1-1/2 inch Schedule 80 PVC pipe?
Yes. The Spears wye is a 1-1/2 inch trade size fitting with solvent-weld socket ends on all three ports, so it slips over 1-1/2 inch Schedule 80 PVC pipe and is primed and cemented in place. Socket means the pipe goes inside the fitting hub, not threaded, so you need primer and PVC cement rated for Schedule 80 pressure work. The manufacturer part number is 8750-15.
2) What pressure is this Spears Schedule 80 PVC wye rated for?
235 PSI. That makes the 1-1/2 inch 8750-15 wye suitable for pressurized lines, not just gravity drainage, which is the practical difference between a Schedule 80 pressure wye and a DWV wye. Pressure rating applies to a properly primed and cemented joint at ambient temperature; PVC loses pressure capability as line temperature climbs.
3) Will a Schedule 80 wye mate with Schedule 40 PVC pipe of the same size?
At 1-1/2 inch, yes on the socket dimension. Schedule 40 and Schedule 80 PVC share the same outside diameter at a given trade size, so 1-1/2 inch Schedule 40 pipe solvent welds into the Spears Schedule 80 socket. What changes is the wall thickness and therefore the system rating: the weakest component sets the working pressure, so joining Schedule 40 pipe to this 235 PSI fitting means the pipe governs, not the wye.
4) Should I use a wye or a 90 degree tee for a branch takeoff in a Schedule 80 PVC line?
Use the wye where flow matters. The angled branch on the Spears 8750-15 keeps the branch flow moving with the main flow, which cuts turbulence, water hammer and pressure loss compared with a tee that turns the branch at a hard 90 degrees. A tee is the simpler choice when the branch is a low-flow takeoff or when space is tight, since the wye takes up more length along the run. On chemical, wastewater and irrigation lines carrying solids or running at high velocity, the wye is the one to specify.
5) Can this Spears PVC wye be used outdoors or in a chemical process line?
Both are listed applications. The Schedule 80 PVC body resists corrosion, chemical exposure, UV degradation and impact, so it holds up in outdoor irrigation and water distribution runs as well as chemical processing and waste handling lines. For a specific process chemical, check that chemical against a PVC compatibility chart before committing, since PVC is not universal across every acid and solvent.
6) Can I thread pipe into this Spears wye instead of gluing it?
No. All three ports on the 8750-15 are solvent-weld sockets, with no threads. If you need a serviceable or disassemblable connection at that point, transition out of the wye with a Schedule 80 socket by thread adapter, or put a union downstream. Gluing is permanent, so dry-fit the branch angle before you cement.
7) How many Spears 8750-15 wyes come in a carton?
Twenty pieces per carton. That is worth knowing if you are stocking a truck or a distribution shelf rather than buying one fitting for a single repair, and it is how Spears packages this 1-1/2 inch socket wye.
How fast can I get the Spears 875-015 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Spears 875-015 come with a warranty?
Absolutely. The Spears 875-015 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Spears 875-015?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Spears 875-015 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!