You may also like
1-PIECE CBL/PIPE CLP 1/4IN STL
Manufacturer Resources
Product Specs
- Idea Granular Category Code Igcc :
- 3064 >> Hose or pipe clamps
- Product Group:
- Connectors
- Product Type:
- Pipe Straps, Pipe Clamps & Hangers (Series 700)
- Selling Unit Of Measure:
- each
- Standards:
- UL E160899
- Surface Finishing:
- SilverGalv/Electro-Galvanized
- Department:
- Electrical
- Product Subgroup:
- Clamps
- Product Material:
- Steel
Thomas & Betts CPC025 – Frequently Asked Questions
1) What size cable or conduit does the Thomas & Betts CPC025 clamp hold?
The CPC025 is a one-piece cable and pipe clamp sized for 1/4 inch runs, so it suits small tubing, flexible cable, and 1/4 inch conduit-size material. Step up to the next clamp size if your run measures larger than 1/4 inch at the outside diameter.
2) Is the Thomas & Betts CPC025 UL listed?
Yes. The clamp carries UL file E160899, which is the listing electricians and inspectors look for when the clamp is supporting cable or conduit in an electrical installation.
3) Is the CPC025 clamp steel or plastic, and will it hold up in a damp location?
It's steel with a SilverGalv electro-galvanized finish. That plating gives reasonable corrosion resistance for interior and protected work, but electro-galvanizing is a thin coating, so for direct weather exposure or wash-down areas a hot-dip or stainless clamp is the better call.
4) What's the difference between a one-piece clamp like the CPC025 and a two-piece pipe clamp?
A one-piece clamp is a single stamped steel body with one fastener hole, so you slip the cable or pipe in and drive one screw. A two-piece clamp splits into a base and a strap and captures the run fully, which matters on vertical runs or where the pipe carries load. For light 1/4 inch cable and small tubing runs, the one-piece CPC025 is the faster install.
5) Does the CPC025 clamp come with mounting screws?
It is sold as the clamp only, one each, so plan on supplying your own fasteners to suit the substrate: wood screws into studs or blocking, self-drilling screws into steel, or anchors into masonry.
6) How do I order enough CPC025 clamps for a long run?
They sell individually, so count your support points and order that quantity. Spacing is set by the code or spec that governs the run you are supporting, not by the clamp itself, so work from your required support interval and add a few spares for damaged or mis-drilled locations.
How fast can I get the Thomas & Betts CPC025 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts CPC025 come with a warranty?
Absolutely. The Thomas & Betts CPC025 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts CPC025?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts CPC025 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.