Metallics JFM5 10-24 x 1/4 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.13
$0.13
Metallics JFM5 10-24 x 1/4 in. Flat Head Slotted Machine Screws - Steel Zinc - 100qty

Metallics JFM5 10-24 x 1/4 in. Flat Head Slotted Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFM5
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.13
$0.13
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-24 x 1/4 in. Flat Head Slotted Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Hardness and tensile strength standards are offered as guides only for stainless machine screws. There is currently no national standard for these performance requirements for stainless machine screws.

  • Features

    • Steel Zinc Material
    • Flat head with slotted Drive
    • Zinc yellow screws are popular in electronics applications.
    • 10-24 Diameter, 1/4" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-1998
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.098 - 0.116 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.333 - 0.362 in.
Fastener Length:
4-Jan
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Mach_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.26 lbs
Product Width:
3 in
Slot Depth:
0.034 - 0.053
Slot Width:
0.05 - 0.06
Sub Division:
Electrical-E H2
Tensile Strength:
1050 lb minimum
Thread Per Inch:
24
Thread Standard:
ANSI/ASME B1.1
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
FM and FMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JFM5 – Frequently Asked Questions

1) Will a 10-24 machine screw thread into a standard electrical box or device yoke?
The Metallics JFM5 is a 10-24 UNC screw cut to the ANSI/ASME B1.1 thread standard at 24 threads per inch, which is the common coarse machine screw thread used on outlet box and device mounting holes tapped 10-24. If the hole in your box, bracket or strap is tapped 10-24, this screw mates with it. At 1/4 inch long it is short, so it suits thin metal where you only need a few threads of engagement, not deep tapped bosses.
2) Does a flat head slotted screw sit flush, and what countersink does it need?
Flat head means the underside of the head is conical and seats down into a countersunk hole so the top finishes flush with the surface. The head measures 0.333 to 0.362 in. across with a head height of 0.098 to 0.116 in., so your countersink needs to be at least that wide and deep to pull it level. In a plain drilled hole with no countersink the head will stand proud.
3) Is this screw strong enough for structural or load-bearing use?
The JFM5 is a low carbon steel fastener made from AISI 1006 to 1022 stock with a hardness of Rockwell B70 to B100 and a 1050 lb minimum tensile strength. That covers device mounting, covers, straps and panel work. It is not a graded high-strength bolt, so for anything carrying structural or heavy mechanical load you want a hardened cap screw instead.
4) Will these screws meet a Buy American or ARRA requirement on a federal job?
Metallics lists the JFM5 as ARRA compliant and Buy American compliant, with China as the country of origin. If your specification allows the ARRA/Buy American compliance flag the manufacturer publishes, these qualify; if your contract requires domestic melt and manufacture, the origin is the number to check against your spec.
5) Do these machine screws meet a dimensional standard I can put on a submittal?
Yes. The flat head dimensions conform to ASME B18.6.3-1998 and the thread to ANSI/ASME B1.1, UNC. Material is AISI 1006 to 1022 steel. That is enough to cite on a submittal for a 10-24 x 1/4 in. flat head slotted machine screw.
How fast can I get the Metallics JFM5 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFM5 come with a warranty?
Absolutely. The Metallics JFM5 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFM5?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFM5 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!