Metallics JFM96 10-24 x 2 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.41
$0.41
Metallics JFM96 10-24 x 2 in. Flat Head Slotted Machine Screws - Steel Zinc - 100qty

Metallics JFM96 10-24 x 2 in. Flat Head Slotted Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFM96
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.41
$0.41
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-24 x 2 in. Flat Head Slotted Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Hardness and tensile strength standards are offered as guides only for stainless machine screws. There is currently no national standard for these performance requirements for stainless machine screws.

  • Features

    • 10-24 Diameter, 2" Length
    • Zinc yellow screws are popular in electronics applications.
    • Flat head with slotted Drive
    • Steel Zinc Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-1998
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.098 - 0.116 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.333 - 0.362 in.
Fastener Length:
2
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Mach_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
1.38 lbs
Product Width:
3 in
Slot Depth:
0.034 - 0.053
Slot Width:
0.05 - 0.06
Sub Division:
Electrical-E H2
Tensile Strength:
1050 lb minimum
Thread Per Inch:
24
Thread Standard:
ANSI/ASME B1.1
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
FM and FMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JFM96 – Frequently Asked Questions

1) Will a 10-24 machine screw thread into a standard electrical box or device bracket?
The Metallics JFM96 is a 10-24 UNC screw, 24 threads per inch, cut to the ANSI/ASME B1.1 thread standard. That is the common machine screw thread used on electrical boxes, mounting brackets, and device plates, so it mates with any 10-24 tapped hole or 10-24 nut. At 2 inches of length it is meant for stacking through spacers, plaster rings, or thick assemblies rather than a flush device screw.
2) Do these Metallics screws meet Buy American or ARRA requirements for a government job?
No. The JFM96 is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your contract carries a domestic sourcing clause, these will not qualify and you'll need a domestically produced 10-24 flat head slotted screw.
3) How many screws come in a jar, and can I buy just a few?
These ship 100 to a jar, and the jar is the order minimum. There is no loose or per-piece count on the Metallics JFM96, so plan on 100 pieces per order. The filled jar weighs 1.38 lbs.
4) Is a zinc plated steel machine screw okay outdoors or in a damp location?
The JFM96 is carbon steel with a zinc finish, made from AISI 1006-1022 steel. Zinc plating is a mild corrosion barrier for dry indoor work, panels, boxes, and equipment rooms. For wet, exterior, or washdown locations, step up to a stainless 10-24 machine screw instead, since plating will eventually rust through.
5) Is a machine screw the right choice, or should I be using a self-tapping screw?
A machine screw like the JFM96 has a straight, uniform 10-24 UNC thread and no point, so it needs a pre-tapped hole or a mating nut. If you are driving into sheet metal or an untapped hole with nothing behind it, a self-drilling or sheet metal screw is the correct part. Where an enclosure, strut fitting, or bracket is already tapped 10-24, the machine screw is what belongs there.
6) Can I use the same 10-24 nuts and washers I already stock with these?
Yes. Thread form is 10-24 UNC per ANSI/ASME B1.1, so any standard 10-24 hex nut, keps nut, or #10 washer in your bin will fit. Nuts and washers are not included in the jar, so order them separately if the job needs them.
How fast can I get the Metallics JFM96 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFM96 come with a warranty?
Absolutely. The Metallics JFM96 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFM96?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFM96 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!