Metallics JRM41SLT 10-24 x 5/8...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.20
$0.20
Metallics JRM41SLT 10-24 x 5/8 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

Metallics JRM41SLT 10-24 x 5/8 in. Round Head Slotted Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JRM41SLT
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.20
$0.20
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-24 x 5/8 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • In 1985, Metallics was the first fastener company in America to offer a full line of Combo’s! | Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • 10-24 Diameter, 5/8" Length
    • Steel Zinc Material
    • Round head with slotted Drive

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.123 - 0.137 in.
Fastener Head Type:
Round
Fastener Head Width:
0.334 - 0.359 in.
Fastener Length:
8-May
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Round_Head_Machine_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.53 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.082 - 0.108
Slot Depth:
0.065 - 0.087
Slot Width:
0.05 - 0.06
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
24
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
JRM
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JRM41SLT – Frequently Asked Questions

1) How are these sold, 100 count or individually?
The JRM41SLT ships as a 100 count jar, and 100 is the order minimum. So one unit on the order gets you a jar of 100 screws, not a single screw. The jar weighs 0.53 lbs.
2) Can I use these to replace a missing green ground screw in a steel box?
Thread-wise yes, 10-24 is the thread tapped into the grounding boss of most steel boxes, and the 5/8 inch length and slotted round head drive the same way. The difference is colour and marking: a dedicated ground screw is green so an inspector can identify it at a glance. For grounding terminations use a green 10-24 ground screw and keep the JRM41SLT zinc screws for general mounting.
3) How strong are these steel zinc machine screws, and are they hard enough for repeated service?
Tensile strength is 60,000 psi minimum, with hardness at Rockwell B70 to B100, made from AISI 1006 to 1022 low carbon steel. That is standard commercial-grade machine screw strength: fine for mounting devices, covers, brackets, and enclosure hardware. It is not a high-strength structural fastener, so do not substitute it where a graded bolt is specified on a drawing.
4) Are zinc plated steel machine screws OK outdoors or in a damp location?
Zinc plating over steel is a mild corrosion barrier intended for dry indoor use, which is what the JRM41SLT carries. For wet, washdown, coastal, or buried work, specify stainless machine screws in the same 10-24 x 5/8 size instead, since the zinc will eventually rust through.
5) Do these Metallics machine screws meet Buy American or ARRA requirements on a public project?
Metallics flags the JRM41SLT as compliant for both ARRA and Buy American, while the country of origin is listed as China. If your contract language requires domestic melt and manufacture rather than the compliance flag, get the certification in writing before you submit it.
How fast can I get the Metallics JRM41SLT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRM41SLT come with a warranty?
Absolutely. The Metallics JRM41SLT is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRM41SLT?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRM41SLT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!