Metallics JTRM75 10-32 x 1-1/2...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.40
$0.40
Metallics JTRM75 10-32 x 1-1/2 in. Round Head Tri-Drive Machine Screws - Steel Zinc - 100qty

Metallics JTRM75 10-32 x 1-1/2 in. Round Head Tri-Drive Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTRM75
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.40
$0.40
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-32 x 1-1/2 in. Round Head Tri-Drive Machine Screws - Steel Zinc - 100qty

  • Features

    • Made in the USA
    • Round head with slotted, Phillips and square Drive
    • Steel Zinc Material
    • 10-32 Diameter, 1-1/2" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Division:
Electrical H1
Fastener Head Type:
Round
Pack Type:
Jar
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Screws
Product Material:
Steel Zinc

Metallics JTRM75 – Frequently Asked Questions

1) Will these machine screws bite into drywall, wood, or sheet metal on their own?
No. These are machine screws, which means a straight, blunt, uniform 10-32 machine thread. They need a pre-tapped hole or a nut. For bare sheet metal use a self-tapping or sheet metal screw, and for drywall use a drywall anchor and its own screw.
2) What driver do I need for Metallics tri-drive machine screws?
Whatever you already have in hand. The JTRM75 head takes a slotted blade, a Phillips bit, or a square (Robertson) bit, so one screw works with three drivers. That matters on a ladder or in a panel where you do not want to swap bits.
3) Is the Metallics JTRM75 screw okay for damp or outdoor locations?
It is zinc-plated steel, which is a mild indoor corrosion coating. Fine for dry interior panels, boxes, and device work. For wet locations, exterior enclosures, coastal air, or chemical exposure, go to a stainless 10-32 machine screw instead; zinc plating will eventually rust through in those conditions.
4) Does a round head screw sit flush, or will it stand proud of the plate?
It stands proud. The JTRM75 has a round head, which is a domed non-countersunk head that seats on top of the surface. If you need the fastener flush in a countersunk hole, such as a finished cover plate with a tapered seat, you want an oval or flat head 10-32 machine screw rather than this one.
5) How do Metallics JTRM75 screws come packaged for a shop or truck stock?
They ship in a jar, which is the usual bulk pack for keeping a single size of machine screw on a shelf or in a service van without loose screws spilling in a tray. Model number to order is JTRM75.
How fast can I get the Metallics JTRM75 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTRM75 come with a warranty?
Absolutely. The Metallics JTRM75 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTRM75?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTRM75 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!