Metallics JTEL103234 10-32 x 3...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.77
$1.97
Image coming soon

Metallics JTEL103234 10-32 x 3/4 in. Pan Head Tri-Drive Telecom Cabinet Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTEL103234

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.77
$1.97
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-32 x 3/4 in. Pan Head Tri-Drive Telecom Cabinet Screws - Steel Zinc - 100qty

  • Features

    • Steel Zinc Material
    • Made in the USA
    • Pan head with Phillips, slotted and square Drive
    • 10-32 Diameter, 3/4" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Division:
Electrical H1
Fastener Head Type:
Pan
Pack Type:
Jar
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Screws
Product Material:
Steel Zinc

Metallics JTEL103234 – Frequently Asked Questions

1) Will a 10-32 x 3/4 in. tri-drive telecom screw thread into standard 10-32 tapped rack rails and cabinet uprights?
Yes. The Metallics JTEL103234 is a machine screw in the 10-32 thread, which is the standard tapped thread on telecom and network cabinet rails, so it threads straight into 10-32 tapped rack holes. Thread length is 3/4 inch, enough to pick up a tapped rail plus a mounting flange or clip on top of it.
2) What driver do I need for Metallics tri-drive telecom cabinet screws?
Take your pick. The pan head on the JTEL103234 is a tri-drive recess, so it accepts a Phillips bit, a flat/slotted blade, or a square (Robertson) bit. On a cabinet build that means whatever is already in the drill works, and a #2 square bit is the one least likely to cam out overhead.
3) Is a pan head screw the right choice for mounting gear in a telecom cabinet, or should I use a flat head?
Pan head is what you want for rack and cabinet work. It bears flat on the surface without needing a countersunk hole, so it clamps a panel, clip, or equipment flange against an untapered rail. A flat head would need a chamfered or countersunk hole to seat properly, which rack rails do not have. The JTEL103234 is a pan head.
4) Will a 3/4 inch long 10-32 screw be too long for thin rack rail?
On a bare tapped rail, 3/4 inch of 10-32 thread will protrude behind it. That is normally fine inside a cabinet, but if clearance behind the rail is tight against a wall or adjacent gear, pick a shorter 10-32 length. The 3/4 inch length on the JTEL103234 is intended for stacking a bracket, clip, or panel flange ahead of the rail.
5) Are these telecom screws plated for indoor equipment room use?
They are steel with a zinc plating, which is the normal finish for indoor telecom closets, equipment rooms, and conditioned cabinet interiors. Zinc on steel is not a marine or outdoor-exposure finish, so for wet or corrosive locations step up to stainless.
6) How do Metallics JTEL103234 screws come packaged?
They ship in a jar, with the part described as a 100 quantity pack of the 10-32 x 3/4 in. screws. The jar format is handy for a van or a gang box since it keeps a loose count of small machine screws contained instead of spilling in a bag.
7) Can I use these for grounding and bonding connections in a telecom cabinet?
Mechanically they fit any 10-32 tapped hole, including the tapped holes on bus bars and rack rails, since the JTEL103234 is a 10-32 x 3/4 inch steel machine screw. For a bonding path, note the fastener is zinc-plated steel rather than a listed grounding screw, so follow whatever your bonding detail specifies for hardware at the connection.
How fast can I get the Metallics JTEL103234 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEL103234 come with a warranty?
Absolutely. The Metallics JTEL103234 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEL103234?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEL103234 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!