Metallics QTEKD7V 10 x 1 in. 5...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.56
$0.56
Metallics QTEKD7V 10 x 1 in. 5/16 Head Quadrive Self-Drilling & Tapping Screws - #2 Drill Point - Domestic Steel Zinc - 500qty

Metallics QTEKD7V 10 x 1 in. 5/16 Head Quadrive Self-Drilling & Tapping Screws - #2 Drill Point - Domestic Steel Zinc - Each

(No reviews yet) Write a Review

Model: QTEKD7V
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.56
$0.56
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 1 in. 5/16 Head Quadrive Self-Drilling & Tapping Screws - #2 Drill Point - Domestic Steel Zinc - 500qty

  • Features

    • 10 Diameter, 1" Length
    • 5/16 Head with Quadrive Drive
    • Made in the USA
    • #2 Drill Point
    • Domestic Steel Zinc Material

Manufacturer Resources

Product Specs

Minimum Purchase:
500 units
Division:
Electrical H1
Product Group:
Fasteners
Screw Point Type:
Drill Point
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Screws
Product Material:
Domestic Steel Zinc

Metallics QTEKD7V – Frequently Asked Questions

1) What thickness of steel will a #2 drill point self-drilling screw go through?
The Metallics QTEKD7V carries a #2 drill point, which is the light-gauge point used for sheet metal and thin steel such as framing track, strut, and enclosure sheet. For heavier structural steel you want a higher drill point number, not a #2.
2) Is this screw made in the USA for a Buy American job?
Yes. The Metallics QTEKD7V is made in the USA from domestic steel, zinc plated, which is what institutional and government electrical specs calling for domestic fasteners look for.
3) Do I need to pre-drill a pilot hole for the Metallics QTEKD7V screw?
No pilot hole. The QTEKD7V is a self-drilling and self-tapping screw, so the drill point cuts its own hole and the threads form their own thread as the screw drives, in one pass with a driver.
4) What driver bit fits a Quadrive 5/16 hex head screw?
The QTEKD7V has a 5/16 inch hex washer head with a Quadrive recess, so you can drive it two ways: a 5/16 inch magnetic hex nut setter, or a square/Phillips-compatible bit in the recess. On overhead or awkward work the 5/16 nut setter is usually the faster option because the head holds itself on the driver.
5) Is the #10 x 1 inch Metallics self-drilling screw OK for outdoor or damp locations?
It is zinc plated domestic steel, which handles dry interior and protected service well. Zinc plating is a mild corrosion coating, not a marine or sustained-wet finish, so for exterior exposure or wet locations step up to a stainless or coated exterior screw instead.
6) What size and length is the Metallics QTEKD7V screw?
#10 diameter, 1 inch long, with a 5/16 hex head. At 1 inch of length it suits attaching strap, clip, box, or light bracket to sheet metal where you only need a short grip; thicker stack-ups need a longer screw.
7) Does the hex washer head on this self-drilling screw need a separate washer?
No separate washer is needed for normal sheet metal work. The 5/16 head seats flat and spreads the load itself. It does sit proud of the surface, so where a fixture or plate has to lay flush, use a flat or pan head screw instead of this hex head.
How fast can I get the Metallics QTEKD7V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics QTEKD7V come with a warranty?
Absolutely. The Metallics QTEKD7V is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics QTEKD7V?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics QTEKD7V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!