Metallics DS182B 10 x 1 in. 5/...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.17
$0.17
Metallics DS182B 10 x 1 in. 5/16 Indented Hex Head Slotted Sharp Point Tapping Screws - Steel Zinc - 4000qty

Metallics DS182B 10 x 1 in. 5/16 Indented Hex Head Slotted Sharp Point Tapping Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: DS182B
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.17
$0.17
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 1 in. 5/16 Indented Hex Head Slotted Sharp Point Tapping Screws - Steel Zinc - 4000qty

  • Additional Notes

    • Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6.4

  • Features

    • 10 Diameter, 1" Length
    • Steel Zinc Material
    • Hex 5/16 Head with slotted Drive

Manufacturer Resources

Product Specs

Minimum Purchase:
4000 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Hex/Slotted
Fastener Head Height:
0.105 - 0.12 in.
Fastener Head Type:
Indented Hex
Fastener Head Width:
0.305 - 0.312 in.
Fastener Length:
1
Hardness:
RockweII C28-38
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Indent_Hex_Head_Slot_TS.pdf
Order Minimum Imperial:
4000
Order Minimum Uom Imperial:
TH
Pack Type:
Box
Product Group:
Fasteners
Product Height:
6.13 in
Product Length:
9 in
Product Weight:
29.25 lbs
Product Width:
9 in
Screw Point Type:
Gimlet Point
Slot Depth:
0.057 - 0.072
Slot Width:
0.05 - 0.06
Sub Division:
Electrical-E H2
Thread Per Inch:
12
Thread Standard:
ASME B18.6.4
Torsional Strength:
48 lb-in minimum
Washer Od:
0.384 - 0.414 in.
Washer Thickness:
0.019 - 0.031 IN
Width Across Corners:
0.34
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type A Tapping Screw
Type2:
Type A Tapping Screw
Series:
JDS
Product Finish:
Zinc
Product Details:
Type A Tapping Screw
Product Material:
Steel Zinc

Metallics DS182B – Frequently Asked Questions

1) What is a Type A tapping screw used for, and will the Metallics DS182B self-tap into sheet metal?
Type A is the coarse-thread, gimlet (sharp) point sheet metal screw. The DS182B has a gimlet point and 12 threads per inch, so it pierces and forms its own thread in thin sheet metal, electrical boxes, duct and similar light-gauge material without a tapped hole. It is not a self-drilling screw, so a pilot hole is still the normal practice in heavier gauge.
2) What is the smallest quantity of Metallics DS182B screws I can buy?
They ship in a box of 4,000 pieces, which is the order minimum. Metallics notes other sizes and quantities are available by request.
3) Is this screw Buy American and ARRA compliant for a government or institutional job?
The DS182B is flagged compliant for both ARRA and Buy American. Country of origin is listed as multiple, so if a project needs a single documented origin, request that confirmation against the specific lot.
4) Does the DS182B have a built-in washer face, and how much bearing surface does it give?
Yes, the indented hex head carries an integral washer with a 0.384 to 0.414 inch outside diameter and 0.019 to 0.031 inch thickness. That spread is what lets it seat on a slotted or oversized hole in sheet metal without a separate washer.
5) What standards do these #10 x 1 in. tapping screws meet?
Head and body dimensions follow ASME B18.6.3-2010, and the thread follows ASME B18.6.4. Steel is AISI 1016 to 1024, heat treated to Rockwell C28-38 with a minimum torsional strength of 48 lb-in. Note that dimensions for the #9 diameter in this family are independent of ASME B18.6.4.
6) Will zinc plated steel screws hold up outdoors or in a damp location?
Zinc plated carbon steel is a dry, indoor-duty finish. It handles interior electrical rooms, panel work and duct fine, but sustained wet, washdown or exterior exposure will rust it. For those openings specify stainless or hot dip galvanized instead.
7) How much does a full box of DS182B screws weigh?
A box runs 29.25 lbs and measures 9 x 6.13 x 9 inches, which matters if you are hand carrying stock up to a mechanical room or allowing for shelf load in a stockroom.
How fast can I get the Metallics DS182B delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics DS182B come with a warranty?
Absolutely. The Metallics DS182B is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics DS182B?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics DS182B from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!