Metallics JTSP28 10 x 1 in. Pa...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.19
$0.19
Metallics JTSP28 10 x 1 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - 100qty

Metallics JTSP28 10 x 1 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTSP28
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.19
$0.19
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 1 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6.4

  • Features

    • Pan head with Phillips Drive
    • 10 Diameter, 1" Length
    • Steel Zinc Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2013
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.122 - 0.133 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.357 - 0.373 in.
Fastener Length:
1
Hardness:
Rockwell C28 - 38
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Phillips Recess Depth:
0.124
Phillips Recess Diameter:
0.186 - 0.199
Phillips Recess Width:
0.031
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.24 lbs
Product Width:
3 in
Screw Point Type:
Gimlet Point
Sub Division:
Electrical-E H2
Thread Per Inch:
12
Thread Standard:
ASME B18.6.4
Torsional Strength:
48 lb-in minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type A Tapping Screw
Type2:
Type A Tapping Screw
Series:
JTSP
Product Finish:
Zinc
Product Details:
Type A Tapping Screw
Product Material:
Steel Zinc

Metallics JTSP28 – Frequently Asked Questions

1) What is a Type A tapping screw used for, and is the Metallics JTSP28 right for sheet metal?
The JTSP28 is a Type A tapping screw, #10 diameter by 1 inch long, with a gimlet (sharp) point and 12 threads per inch. Type A with a sharp point is the coarse-thread sheet metal screw meant to be driven into a pilot hole in thin sheet metal, and the gimlet point starts without needing a punched hole in light gauge. For thicker steel or structural attachment you want a Type AB or a self-drilling screw instead.
2) What driver bit do I need for these #10 Phillips pan head tapping screws?
A #2 Phillips bit. The recess is 0.186 to 0.199 inch in diameter, 0.124 inch deep, with a 0.031 inch slot width, which is the standard #2 Phillips geometry. Using a #1 will cam out and a #3 will not seat.
3) Are zinc plated steel tapping screws okay for outdoor or damp locations?
These are zinc plated carbon steel, which is a dry indoor-use finish. Zinc plating handles incidental moisture and handling, but in exterior, wet location, or coastal work it will corrode. For those jobs specify a stainless or hot-dip galvanized sheet metal screw instead.
4) What standards do these #10 pan head tapping screws meet for a submittal?
Dimensions are to ASME B18.6.3-2013 and the thread form is to ASME B18.6.4. Material is AISI 1016 to 1024 steel. Note that for #9 diameter screws in the series the dimensions are independent of ASME B18.6.4; the #10 x 1 inch here follows the standards as listed.
5) How are the JTSP28 screws packaged and what is the smallest quantity I can order?
They ship in a jar of 100, which is the order minimum (100 count). Jar packaging suits a van or shop shelf better than a loose bag. Other sizes and quantities in the JTSP series are available by request.
6) Do these screws qualify for a Buy American or ARRA job?
The JTSP28 carries ARRA and Buy American compliance codes of C, with country of origin listed as China. On a federally funded project that distinction matters, so verify which clause your contract is written to before you commit these on a submittal.
How fast can I get the Metallics JTSP28 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTSP28 come with a warranty?
Absolutely. The Metallics JTSP28 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTSP28?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTSP28 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!