Metallics JTTS25 10 x 1/2 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.29
$0.29
Metallics JTTS25 10 x 1/2 in. Pan Head Tri-Drive Tapping Screws - Steel Zinc - 100qty

Metallics JTTS25 10 x 1/2 in. Pan Head Tri-Drive Tapping Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTTS25
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.29
$0.29
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 1/2 in. Pan Head Tri-Drive Tapping Screws - Steel Zinc - 100qty

  • Features

    • Pan head with slotted, Phillips and square Drive
    • Made in the USA
    • 10 Diameter, 1/2" Length
    • Steel Zinc Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Division:
Electrical H1
Fastener Head Type:
Pan
Pack Type:
Jar
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Screws
Product Material:
Steel Zinc

Metallics JTTS25 – Frequently Asked Questions

1) What driver do I need for Metallics JTTS25 tri-drive tapping screws?
Any of three. The JTTS25 pan head is a tri-drive, meaning the head is cut with a slot, a Phillips recess, and a square recess, so a flat blade, a #2 Phillips, or a square driver all engage it. That is the point of the head type on an electrical job, you drive it with whatever is already in your pouch or on the screw gun.
2) What size are the Metallics JTTS25 screws?
A #10 diameter, 1/2 inch long. Short enough to land in sheet metal boxes, device straps, and panel trims without the point bottoming out behind the enclosure.
3) Are the JTTS25 tapping screws okay for damp or outdoor locations?
They are zinc plated steel, which is a dry to normally damp interior plating. Zinc gives corrosion resistance for indoor boxes, panels, and raceway work, but for wet, exterior, or corrosive locations you want stainless rather than zinc plated steel.
4) Do I need to pre-drill for these tri-drive tapping screws?
They are tapping screws, so they cut their own thread into a pilot hole in sheet metal or thin stock rather than needing a tapped thread. Drill the pilot to suit the #10 shank and the screw forms the thread as it drives. They are not self-drilling, so a pilot hole is still required.
5) Will a pan head screw sit flush, or does it stand proud of the surface?
Pan head, so it stands proud with a flat bearing underside, not countersunk. That broad flat seat is what you want when fastening a strap, bracket, or cover to sheet metal, since it spreads the clamp load and will not pull through. If the head has to finish flush with the surface, you need a flat head countersunk screw instead.
6) How do the JTTS25 screws come packaged for stockroom use?
They ship in a jar of 100, which is the format MRO and electrical stockrooms tend to want on the shelf, since the jar keeps the count contained on a cart or in a gang box drawer.
7) Are Metallics JTTS25 screws made in the USA for a domestic-content spec?
Yes, the JTTS25 tri-drive tapping screws are made in the USA, which matters on government, education, and institutional jobs carrying a domestic-content requirement on fasteners.
How fast can I get the Metallics JTTS25 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTTS25 come with a warranty?
Absolutely. The Metallics JTTS25 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTTS25?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTTS25 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!