Metallics JRWS26V 10 x 1/2 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.36
$0.36
Metallics JRWS26V 10 x 1/2 in. Round Washer Head Combo Sharp Point Tapping Screws - Steel Zinc - 500qty

Metallics JRWS26V 10 x 1/2 in. Round Washer Head Combo Sharp Point Tapping Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JRWS26V
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.36
$0.36
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 1/2 in. Round Washer Head Combo Sharp Point Tapping Screws - Steel Zinc - 500qty

  • Features

    • Made in the USA
    • Round washer head with Phillips and square Drive
    • 10 Diameter, 1/2" Length
    • Steel Zinc Material

Manufacturer Resources

Product Specs

Minimum Purchase:
500 units
Division:
Electrical H1
Fastener Head Type:
Round Washer
Pack Type:
Jar
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Screws
Product Material:
Steel Zinc

Metallics JRWS26V – Frequently Asked Questions

1) Will a #10 x 1/2 in. sharp point screw bite into sheet metal, or do I need a self-drilling point?
Sharp point tapping screws like the JRWS26V form their own thread in thin material, but they do not drill their own hole the way a self-drilling (Tek) point does. They work in light gauge sheet, wood, and plastic, or in a pre-punched or pre-drilled hole. For structural steel or heavier gauge, go with a self-drilling point instead.
2) What drive bit do the Metallics JRWS26V tapping screws take?
The JRWS26V takes either a #2 Phillips or a square (Robertson) bit, since it's a combo drive head. Handy if your crew is mixed on driver preference or you're working overhead where a square bit holds the screw better without cam-out.
3) What is the round washer head on these Metallics screws for?
The round washer head gives a wider bearing surface than a standard pan head, so it spreads clamping load and resists pull-through on softer or thinner material. That's why it's the common choice for fastening panels, straps, and device brackets where a plain pan head would sink or tear through.
4) Are these screws OK for outdoor or damp locations?
The JRWS26V is zinc plated steel, which is a mild corrosion coating meant for dry interior work. It'll handle incidental moisture, but for exterior, wet, or corrosive locations use a stainless or hot dip galvanized fastener rather than zinc plated.
5) Is 1/2 inch long enough for mounting straps and brackets to a stud?
At 1/2 inch of length, the JRWS26V is a short fastener, meant for thin assemblies: strap to light gauge stud, device bracket to panel, cover plates and similar. Once you need meaningful penetration into wood framing, step up to a longer screw in the same #10 round washer head pattern.
6) How many Metallics JRWS26V screws come in a jar?
The JRWS26V is packaged 500 pieces to a jar. The jar pack keeps them contained on a cart or in a van bin rather than loose in a box, which is why electrical crews tend to buy these this way for repeat panel and strap work.
7) Are Metallics JRWS26V screws domestically made?
Yes, these #10 x 1/2 in. round washer head tapping screws are made in the USA, which matters if you're on a job with domestic sourcing requirements in the spec.
How fast can I get the Metallics JRWS26V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRWS26V come with a warranty?
Absolutely. The Metallics JRWS26V is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRWS26V?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRWS26V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!