10 x 3 in. 5/16 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - 100qty
Features
- Steel Zinc Material
- 5/16 Indented Hex Head with Hex Drive
- 10 Diameter, 3" Length
- #2 Drill Point
- Minimum torques are the same for stainless and steel self-drill screws. Drill time is 2.5 seconds for a 1 mm thick plate.
Additional Notes
- Other sizes and quantities available by request. | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.
Manufacturer Resources
Product Specs
- Arra Compliant:
- N
- Buy American Compliant:
- No
- Collection Folder:
- JTEKD23
- Country Of Origin:
- MUL
- Dimensional Standard:
- ASME B18.6.3-2010
- Division:
- Electrical H1
- Drill Point Size:
- #2
- Drive Type:
- Hex
- Fastener Head Height:
- 0.105 - 0.12 in.
- Fastener Head Type:
- Indented Hex
- Fastener Head Width:
- 0.305 - 0.312 in.
- Fastener Length:
- 3
- Field Application:
- Electrical, Plumbing, Heating and Air Conditioning Industries
- Finish:
- Zinc
- Hardness:
- Rockwell C32-40
- Height:
- 5.75 in
- Igcc:
- 2778
- Language Code:
- EN
- Length:
- 3.5 in
- Material:
- Steel Zinc
- Material Standard:
- AISI 1016 - 1024
- Neurspe:
- https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Head_Self-Drill_TS_Indent_Hex_Washer.pdf
- Npd Date Electrical:
- 2007-04-24T00:00:00.000Z
- Order Minimum Imperial:
- 100
- Order Minimum Uom Imperial:
- JR
- Pack Type:
- Jar
- Panel Thickness:
- 0.035 - 0.110 IN
- Product Family:
- Electrical Supplies
- Product Height:
- 146.05 MM
- Product Length:
- 88.9 MM
- Product Series:
- JTEKD
- Product Weight:
- 844 g
- Product Width:
- 88.9 MM
- Screw Point Type:
- Drill Point
- Slot Depth:
- 0.057 - 0.072
- Slot Width:
- 0.05 - 0.06
- Sub Division:
- Electrical-E H2
- Thread Per Inch:
- 16
- Thread Standard:
- SAE J78 - 2013
- Torsional Strength:
- 61 lb-in minimum
- Type:
- Type BSD Self-Drilling & Tapping Screw
- Washer Od:
- 0.384 - 0.414 in.
- Washer Thickness:
- 0.019 - 0.031 IN
- Weight:
- 1.86 lbs
- Width:
- 3.5 in
- Width Across Corners:
- 0.34
- Product Type:
- Self-Drilling & Tapping Screw