Metallics JGDS7 10 x 4 in. Fla...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.66
$0.66
Metallics JGDS7 10 x 4 in. Flat Head Phillips Deck Screws - Steel Yellow Zinc - Coarse Threads - 100qty

Metallics JGDS7 10 x 4 in. Flat Head Phillips Deck Screws - Steel Yellow Zinc - Coarse Threads - Each

(No reviews yet) Write a Review

Model: JGDS7
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.66
$0.66
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 4 in. Flat Head Phillips Deck Screws - Steel Yellow Zinc - Coarse Threads - 100qty

  • Additional Notes

    • Bit Not Included | other sizes and quantities available by request

  • Features

    • Flat Head with Phillips Drive
    • Steel Yellow Zinc Material
    • Coarse Threads
    • 10 Diameter, 4" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Division:
Electrical H1
Drive Type:
Phillips
Fastener Head Type:
Flat
Fastener Length:
4
Field Application:
All Weather Wood Application, Electrical, Plumbing, Heating and Air Conditioning Industries
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
7.25 in
Product Length:
4.5 in
Product Weight:
2.16 lbs
Product Width:
4.5 in
Sub Division:
Electrical-E H2
Thread Spacing:
Coarse
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Deck Screw
Type2:
Deck Screw
Series:
JGDS
Product Finish:
Yellow Zinc Dichromate
Product Details:
Deck Screw
Product Material:
Steel Yellow Zinc

Metallics JGDS7 – Frequently Asked Questions

1) How many screws come in a jar of Metallics JGDS7 deck screws, and can I buy less than that?
The JGDS7 ships as a jar of 100 screws, and 100 is the order minimum, so a jar is the smallest purchase. Metallics does offer other sizes and quantities of the JGDS series by request.
2) Do Metallics JGDS7 deck screws meet Buy American or ARRA requirements for a public project?
No. The JGDS7 is listed as not Buy American compliant and not ARRA compliant, with multiple countries of origin. If your contract carries a domestic sourcing clause, this screw will not satisfy it.
3) Is the yellow zinc finish on these deck screws OK for outdoor use?
The finish is yellow zinc dichromate over steel, and Metallics lists the JGDS series for all weather wood applications. That is a coated carbon steel screw, not stainless, so treat it as general exterior wood fastening rather than a marine or coastal-exposure screw.
4) What driver bit do I need for Metallics JGDS7 screws, and is one in the jar?
These are Phillips drive with a flat head, and no bit is packed in the jar. Bring your own Phillips bit, and expect to keep steady pressure on a 4 inch screw to avoid camming out.
5) Are these Metallics deck screws only for decks, or can I use them on electrical and mechanical rough-in work?
Metallics lists the JGDS series for all weather wood applications plus the electrical, plumbing, heating and air conditioning trades. Typical uses are mounting backer boards, strut backing, and wood blocking where you need a long coarse thread wood screw rather than a machine screw.
6) Is a coarse thread deck screw the right choice, or should I use a fine thread screw?
Coarse thread is what you want in wood. The JGDS7 is a coarse UNC thread, which clears chips and grips softwood fiber better; fine thread screws are for hardwood or metal substrates where a coarse thread would strip. If you are fastening into steel studs or sheet metal, this is the wrong screw.
7) Will a flat head deck screw sit flush or do I have to countersink it?
The JGDS7 uses a flat head, which is a countersinking head profile, so it draws itself flush into softwood as you drive it. In hardwood or near a board end, pre-drilling with a countersink keeps the head from mushrooming the surface.
8) How much does a jar of 100 Metallics JGDS7 screws weigh and how big is the container?
A jar runs 2.16 lbs, with stated package dimensions of 7.25 x 4.5 x 4.5 inches. Light enough to throw several on a van shelf without a second thought.
How fast can I get the Metallics JGDS7 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JGDS7 come with a warranty?
Absolutely. The Metallics JGDS7 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JGDS7?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JGDS7 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!