You may also like
1/0AN-2/0AWG 90DEG W/1/2BH NICKELPL
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal - 90 Degree Bend
- Wire Size:
- 1/0AN-2/0
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Material:
- Copper
Sta-Kon J975UNP – Frequently Asked Questions
1) Will this copper lug work on aluminum conductor?
The J975UNP is a copper lug, so use it on copper conductor in the 1/0AN to 2/0 AWG range. Aluminum conductor calls for an AL9CU or aluminum-rated connector; copper-only lugs on aluminum invite galvanic corrosion at the barrel.
2) Why would I use a 90 degree ring terminal instead of a straight one?
The 90 degree bend in the J975UNP turns the lug's tongue perpendicular to the barrel, which lets heavy 1/0 to 2/0 cable come in from the side and still bolt flat to a pad. That matters in tight panels, breaker enclosures and battery compartments where a straight lug would force a hard bend in a cable that doesn't like being bent. If you have room to run the cable straight at the pad, a straight-tongue lug is the simpler choice.
3) Is the Sta-Kon J975UNP insulated?
No. It is a non-insulated copper lug, so the barrel and tongue are bare metal. If the connection needs covering, plan on adhesive-lined heat shrink or a boot over the barrel after crimping.
4) What is the J975UNP made of, and is it plated?
Copper body with a nickel plating. Nickel plate is what you specify when the termination sees heat or a corrosive environment, where bare copper or tin plate would oxidize at the contact face.
5) Do I need a crimp tool for the Sta-Kon J975UNP, or can I solder it?
It is a crimp lug, and at 1/0 to 2/0 you are into hydraulic or heavy mechanical crimp territory, not hand pliers. Nothing is included with the terminal, so the die set for this barrel size is a separate purchase. Solder is not a substitute for a proper crimp on power conductor this size.
6) What exactly do I order to get this Sta-Kon lug, and where is it made?
Order by manufacturer part number J975UNP. There is a single configuration, so no plating or hole-size suffix to pick. Country of origin is Mexico.
How fast can I get the Sta-Kon J975UNP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon J975UNP come with a warranty?
Absolutely. The Sta-Kon J975UNP is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon J975UNP?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon J975UNP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.