You may also like
11-in-1 Screwdriver/Nut Driver
Features
- Accu-Loop™ wire looping holes
- Cushioned grip for comfort and performance
Manufacturer Resources
Product Specs
- Product Group:
- Hand Tools
- Department:
- Electrical
- Product Subgroup:
- Screwdrivers & Drivers
- Includes:
- 1/4 in. Slotted, 3/16 in. Slotted, #2 Phillips, #1 Phillips, #1 Square, #2 Square, #15 Star, #10 Star, 5/16 in. Nutdriver & 1/4 in. Nutdriver
- parent sku:
- IDL-35-910
- Product Type:
- Multi-Bit Screwdriver
Ideal Industries 35-910 – Frequently Asked Questions
1) What bits and nut driver sizes come with the IDEAL 35-910 11-in-1 screwdriver?
The IDEAL 35-910 carries ten driving tips plus the shaft: 1/4 inch slotted, 3/16 inch slotted, #2 Phillips, #1 Phillips, #1 square, #2 square, #15 star, #10 star, and 5/16 inch and 1/4 inch nut drivers. That covers the usual electrical mix, device screws and cover plates on slotted and Phillips, panel and fixture screws on square drive, and the two nut driver sizes for hex-head sheet metal screws and ground lugs.
2) Can I make wire loops for terminal screws with this IDEAL multi-bit driver?
Yes. The 35-910 has Accu-Loop wire looping holes built into the tool, so you can form a clean loop on solid conductor for a screw terminal without reaching for a separate pair of pliers. Handy when you are terminating receptacles and switches back to back and want consistent loops.
3) Will the IDEAL 35-910 handle Torx security screws on light fixtures and panels?
It includes #15 and #10 star tips, which cover the two most common Torx sizes found on fixtures, ballast covers and equipment enclosures. Larger or smaller star sizes are not part of the set, so keep a dedicated Torx set on the truck for oddball sizes.
4) Is one 11-in-1 driver enough for a service tech's pouch, or do I still need separate screwdrivers?
For general electrical work the 35-910 replaces most of what a tech carries loose: both common slotted widths, two Phillips, two square drive, two star, and two nut driver sizes in a single cushioned-grip handle. Where it will not stand in is heavy prying or high-torque work, since a multi-bit shaft is not a fixed-blade screwdriver, and anything outside those ten tip sizes still needs a dedicated driver.
5) What part number do I order for the IDEAL 11-in-1 screwdriver and nut driver?
Order IDEAL Industries 35-910. It is sold as a single model with no size, finish or handle options to specify, so the one part number gets you the complete 11-in-1 tool with all ten tips.
6) Does the IDEAL 35-910 include square drive bits for Robertson screws?
Both #1 and #2 square drive are in the set. That matters if you work with Canadian-sourced devices or any panel and box hardware using Robertson heads, which a slotted or Phillips tip will cam out of.
How fast can I get the Ideal Industries 35-910 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ideal Industries 35-910 come with a warranty?
Absolutely. The Ideal Industries 35-910 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ideal Industries 35-910?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Ideal Industries 35-910 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.