You may also like
11/4X1/2X11/4 GALV MI TEE
Manufacturer Resources
Product Specs
- Dimensions Specification:
- ASME B16.3
- End Conn Size 1:
- FPT
- End Conn Size 2:
- FPT
- End Conn Size 3:
- FPT
- Finish Specification:
- ASTM A-153
- Material Specification:
- ASTM A-197
- Pressure Rating Specification:
- ASME B16.3
- Size 1:
- 1.25
- Size 2:
- 0.5
- Size 3:
- 1.25
- Strength:
- STD
- Thread Specification:
- ASME B1.20.1
- Ul Fm:
- Yes
- Department:
- Plumbing
- Product Group:
- Pipe Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Finish:
- Galvanized
- Product Material:
- Malleable Iron
- Product Weight:
- 1.07 lbs
ASC Engineered Solutions 311044606 – Frequently Asked Questions
1) What size openings does the ASC Engineered Solutions 311044606 galvanized malleable iron tee have?
It's a reducing tee: 1-1/4 inch on both run ends and 1/2 inch on the branch. All three openings are female pipe thread (FPT), so it takes male-threaded pipe or nipples on every port. Use it where you need to pull a 1/2 inch takeoff off a 1-1/4 inch line without adding a separate bushing.
2) Is this galvanized malleable iron tee approved for fire sprinkler piping?
It carries UL/FM approval, which is what an AHJ looks for on fire protection piping. Galvanized malleable iron fittings are commonly used on dry and pre-action sprinkler systems for that reason. Confirm the size and pressure class match the sprinkler drawing before it goes in.
3) Is this a standard or extra heavy malleable iron fitting?
Standard (STD) class, dimensioned and pressure rated to ASME B16.3. If your spec calls for a 300 class extra heavy malleable fitting, this is not the one, since B16.3 Class 150 standard and Class 300 have different wall thickness and pressure ratings.
4) Can I use a galvanized malleable iron tee on a water line, or should it be brass?
The galvanizing here is a hot dip zinc coating to ASTM A153, which is what gives malleable iron its corrosion resistance in wet and outdoor service. It's the usual choice for fire protection, compressed air and general galvanized steel pipe systems. For potable water, check your local code and whether a lead-free certified fitting is required for the application.
5) How much does this 1-1/4 x 1/2 x 1-1/4 galvanized tee weigh?
About 1.07 lbs each. Worth knowing if you're figuring hanger spacing and total load on a run with a lot of fittings, or estimating freight on a bulk order for a job.
How fast can I get the ASC Engineered Solutions 311044606 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ASC Engineered Solutions 311044606 come with a warranty?
Absolutely. The ASC Engineered Solutions 311044606 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ASC Engineered Solutions 311044606?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ASC Engineered Solutions 311044606 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.