Metallics JSHC712112 1/2-13 x ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$385.71
Image coming soon

Metallics JSHC712112 1/2-13 x 1-1/2 in. Socket Head Hex Cap Screws - Alloy Steel Black - Each

(No reviews yet) Write a Review

Model: JSHC712112

In Stock (leaves warehouse same day if ordered before 3pm ET)

$385.71
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
1/2-13 x 1-1/2 in. Socket Head Hex Cap Screws - Alloy Steel Black - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Cap screws of a length 3D or greater, where D equals the nominal diameter of the screw, are subject to tensile strength, yield strength, elongation and reduction of area testing.

  • Features

    • Socket head with Hex Drive
    • Elongation is 10% minimum (applies to machined specimens of lenglh at least 4D where D equals the nominal diameter of the screw) and Reduction of Area is 33% minimum (applies to machined specimens)
    • Supplies greater tensile strength than equivalent sizes of Grade-5 or Grade-8 hex head cap screws while requiring less surface area or counterbore since the fastener is intenally wrenched.
    • Alloy Steel Black Material
    • 1/2-13 Diameter, 1-1/2" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.3-2012
Division:
Electrical H1
Drive Type:
Hex
Fastener Head Height:
0.492 - 0.5 in.
Fastener Head Type:
Socket
Fastener Head Width:
0.735 - 0.75 in.
Fastener Length:
1/1/02
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell C39
Hex Size:
8-Mar
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Socket_Head_Cap_Screw_Alloy_Zinc.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
5.75 in
Product Length:
3.5 in
Product Weight:
5.2 lbs
Product Width:
3.5 in
Slot Depth:
0.245
Sub Division:
Electrical-E H2
Tensile Strength:
180000 psi minimum
Thread Per Inch:
13
Thread Type:
UN
Wall Thickness:
0.19
Yield Strength:
162000 psi minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Cap Screw
Type2:
Cap Screw
Series:
SHC
Product Finish:
Black
Product Details:
Cap Screw
Product Material:
Alloy Steel Black

Metallics JSHC712112 – Frequently Asked Questions

1) Will a 1/2-13 socket head cap screw thread into my existing 1/2-13 tapped hole or nut?
Yes. The Metallics JSHC712112 is a 1/2 inch diameter screw with 13 threads per inch in the UN (unified inch) thread series, so it mates with any standard 1/2-13 UNC tapped hole, nut, or insert. Thread length consideration aside, the screw is 1-1/2 inches long overall.
2) Is a socket head cap screw stronger than a Grade 8 hex bolt of the same size?
In tensile terms, yes. This alloy steel socket head cap screw is rated at 180,000 psi minimum tensile and 162,000 psi minimum yield, which runs above equivalent sizes of Grade 5 or Grade 8 hex head cap screws. It also needs less surface area or counterbore because it's wrenched internally rather than across the flats. Hardness is Rockwell C39.
3) What counterbore do I need to sink this 1/2 inch socket head screw flush?
Head width runs 0.735 to 0.75 inch and head height 0.492 to 0.5 inch, so a counterbore slightly over 3/4 inch diameter and at least 1/2 inch deep will take the head flush. Dimensions conform to ASME B18.3-2012, the socket cap screw standard, so standard counterbore tooling for 1/2 inch socket head screws applies.
4) Are Metallics JSHC712112 cap screws Buy American or ARRA compliant for a government job?
No. These are not Buy American compliant and not ARRA compliant, and country of origin is listed as multiple. If your project carries domestic sourcing requirements, this part will not satisfy them.
5) Is the black finish on these alloy steel cap screws corrosion resistant enough for outdoor or wet locations?
No. The material is alloy steel with a plain black finish, which is an oxide/oil type surface, not a plated corrosion barrier. Keep these for dry indoor structural, equipment, and panel work. For damp, exterior, or washdown locations choose a zinc plated or stainless socket head cap screw in the same 1/2-13 x 1-1/2 size instead.
6) Do I have to buy these cap screws in a full jar, or can I get just a few?
They ship as a jar of 100 pieces, which is the order minimum. Other sizes and quantities are available by request.
7) What are these socket head cap screws typically used for in the trades?
Metallics lists them for the electrical, plumbing, heating and air conditioning industries, which is where the internal wrenching matters most: mounting equipment, strut and bracket connections, and machine or panel work in tight spots where a wrench cannot swing around a hex head.
8) Does a 1-1/2 inch long 1/2-13 cap screw get tensile tested?
Yes. Cap screws of a length 3D or greater, where D is the nominal diameter, are subject to tensile strength, yield strength, elongation, and reduction of area testing. At 1/2 inch diameter, 3D is 1-1/2 inches, so this screw meets that threshold. Elongation is 10 percent minimum and reduction of area 33 percent minimum on machined specimens.
How fast can I get the Metallics JSHC712112 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSHC712112 come with a warranty?
Absolutely. The Metallics JSHC712112 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSHC712112?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSHC712112 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!