Metallics JFM114 1/2-13 x 1 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JFM114 1/2-13 x 1 in. Flat Head Slotted Machine Screws - Steel Zinc - 100qty

Metallics JFM114 1/2-13 x 1 in. Flat Head Slotted Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFM114
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
1/2-13 x 1 in. Flat Head Slotted Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Hardness and tensile strength standards are offered as guides only for stainless machine screws. There is currently no national standard for these performance requirements for stainless machine screws.

  • Features

    • Zinc yellow screws are popular in electronics applications.
    • Flat head with slotted Drive
    • Steel Zinc Material
    • 1/2-13 Diameter, 1" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-1998
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.186 - 0.223 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.765 - 0.815 in.
Fastener Length:
1
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Mach_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
5.52 lbs
Product Width:
3 in
Slot Depth:
0.065 - 0.103
Slot Width:
0.091 - 0.106
Sub Division:
Electrical-E H2
Tensile Strength:
8500 lb minimum
Thread Per Inch:
13
Thread Standard:
ANSI/ASME B1.1
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
FM and FMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JFM114 – Frequently Asked Questions

1) Will the Metallics JFM114 machine screw thread into a 1/2-13 tapped hole or standard 1/2 inch coarse nut?
Yes. The JFM114 is a 1/2-13 UNC screw, 13 threads per inch, cut to ANSI/ASME B1.1. That is the standard coarse series for 1/2 inch diameter, so it mates with any 1/2-13 tapped hole, nut, or strut channel nut. If the hole you are threading into is 1/2-20 fine, this screw will not start.
2) Do these Metallics screws qualify for a Buy American or ARRA funded job?
No. The JFM114 is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. On a federally funded project with domestic sourcing requirements, you will need a domestically manufactured fastener instead.
3) How many 1/2-13 x 1 in. Metallics flat head screws come in a jar?
They ship 100 to a jar, and the jar is the order minimum, so the smallest buy is 100 pieces. Jar weight is listed at 5.52 lbs. If you need a count other than 100, Metallics states other sizes and quantities are available by request.
4) Are zinc plated steel machine screws okay outdoors or in a wet location?
Zinc plated carbon steel is the finish here, which suits dry indoor use, panels, enclosures, and electronics work. It is a sacrificial plating, not stainless, so in rain, washdown, or coastal exposure it will eventually bloom white and then rust. For wet or corrosive locations, specify a stainless flat head machine screw in the same 1/2-13 x 1 in. size.
5) Is a machine screw the right choice, or do I need a bolt or sheet metal screw for mounting to a panel?
A machine screw like this 1/2-13 x 1 in. flat head is fully threaded for its length and meant to go into a pre-tapped hole or take a nut. It will not cut its own thread, so it is the wrong part for driving straight into unthreaded sheet metal, where a self tapping or sheet metal screw belongs. Pick the flat head version, as here, when the fastener has to finish flush in a countersunk hole; a pan or hex head is the choice when a raised head is acceptable and you want a better driving surface.
How fast can I get the Metallics JFM114 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFM114 come with a warranty?
Absolutely. The Metallics JFM114 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFM114?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFM114 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!