Metallics JSPM104SS 12-24 x 1-...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JSPM104SS 12-24 x 1-1/4 in. Pan Head Slotted Machine Screws - 18-8 Stainless - 100qty

Metallics JSPM104SS 12-24 x 1-1/4 in. Pan Head Slotted Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSPM104SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
12-24 x 1-1/4 in. Pan Head Slotted Machine Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • Pan head with slotted Drive
    • 12-24 Diameter, 1-1/4" Length
    • 18-8 Stainless Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.112 - 0.125 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.407 - 0.425 in.
Fastener Length:
1/1/04
Hardness:
Rockwell BBS-B9S
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
1.33 lbs
Product Width:
3 in
Slot Depth:
0.061 - 0.077
Slot Width:
0.056 - 0.067
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
24
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
SPM
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JSPM104SS – Frequently Asked Questions

1) Do these screws meet dimensional spec for submittals on a government or federally funded job?
They are built to ASME B18.6.3-2010 dimensionally, with SAE as the material standard, and the line is flagged both ARRA compliant and Buy American compliant. Country of origin is listed as multiple, so if your contract requires a single named origin, confirm the origin on the lot you receive.
2) Are these 18-8 stainless machine screws OK for outdoor or damp-location mounting?
The screw is 18-8 stainless throughout, which is the austenitic grade normally specified for wet and outdoor service, so it holds up in damp locations and exterior enclosures far better than a zinc-plated steel screw. It also avoids the galvanic problem of plated steel in stainless or aluminum enclosures.
3) How much does a pan head slotted machine screw stand off the surface once installed?
Head height runs 0.112 to 0.125 in. with a head width of 0.407 to 0.425 in. That low, broad pan profile spreads the bearing load on sheet metal and plastic plates without the head sitting proud enough to interfere with a cover or faceplate.
4) How strong is an 18-8 stainless machine screw compared to a plated steel one?
Tensile strength is 80,000 psi minimum. Metallics notes that stainless machine screw strength values are approximations only, because there is no single performance standard for stainless machine screws. For structural or high-torque pull, a hardened alloy steel screw rates higher; for corrosion service at device-mounting loads, 80,000 psi is ample.
5) How are these 12-24 x 1-1/4 stainless screws packaged and what is the smallest quantity I can buy?
They ship in a jar of 100, and 100 count is the order minimum. Metallics lists the packed jar at 1.33 lbs and 3 x 3 x 2.7 in., so it drops into a van bin or a cart drawer without repacking. Other sizes and quantities are available by request.
6) Can I use these as device or cover screws, or do I need a different head style?
Pan head sits on the surface, so these work where the screw head is allowed to show or clamp a strap, bracket, or ground bar. They are not a flush fastener. If your plate or enclosure has a countersunk hole and the head must finish flat with the surface, you need a flat head machine screw in the same 12-24 x 1-1/4 size instead.
7) Is the JSPM104SS a machine screw or a self-tapping sheet metal screw?
It is a machine screw, Metallics SPM series, model JSPM104SS. Machine threads run the full length and need a tapped hole or a nut, they will not form their own thread in sheet metal. For blind sheet metal you want a self-tapping or sheet metal screw instead.
How fast can I get the Metallics JSPM104SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSPM104SS come with a warranty?
Absolutely. The Metallics JSPM104SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSPM104SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSPM104SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!