You may also like
12 TON PRESS ML HEX DIE WIRE 4/0 AN
Manufacturer Resources
Product Specs
- Application:
- Die for Non-Insulated Terminal to fit 13642M - Terminal Size M
- Capacity Rating:
- 12 ton (UK)
- Country Of Origin:
- United States (US)
- Product Subgroup:
- Crimping Dies
- Product Type:
- Die
- Department:
- Electrical
- Product Group:
- Tools & Accessories
- Product Size:
- Wire Size 4/0 AN
Sta-Kon 11789M – Frequently Asked Questions
1) What wire size does the Sta-Kon 11789M hex die crimp?
The 11789M die is set up for 4/0 AWG wire, using terminal size M. It is a hex crimp die for non-insulated terminals, so it forms a six-sided compression crimp rather than an oval or indent crimp.
2) Will the Sta-Kon 11789M die work in my crimping tool?
It is a 12 ton die, so it belongs in a 12 ton compression head (hydraulic or mechanical press-type). Dies are rated to the press tonnage they seat in, so a 6 ton or 10 ton head is the wrong host for this one.
3) Which Sta-Kon terminal is the 11789M die matched to?
It is matched to the 13642M non-insulated terminal, terminal size M. If you are crimping a different lug code, you need the die that corresponds to that code, not this one, because the hex cavity is sized to one terminal barrel.
4) Can I use the 11789M die on insulated terminals or lugs?
No. This die is cut for non-insulated terminals. Insulated terminals need a die profile that does not cut or crush the insulating sleeve, so use a die intended for insulated barrels instead.
5) Is a hex die the right choice for 4/0 copper lugs, or should I use an indent crimp?
Hex dies compress the barrel from six sides and give a uniform, full-circumference crimp, which is what most specs call for on large copper connectors like 4/0. Indent crimps bite in at points and are generally tied to specific connector systems. The 11789M is the hex option for 4/0 with size M terminals in a 12 ton press.
6) What is the Sta-Kon part number to order for a 12 ton 4/0 hex die?
Order Sta-Kon 11789M. That is the manufacturer part number, and it covers the 12 ton press hex die for 4/0 wire with size M non-insulated terminals. It ships as a single die, not a die set.
7) Is the Sta-Kon 11789M die made in the USA?
Yes, the 11789M crimping die is manufactured in the United States. That matters on government, institutional, and federally funded work where domestic sourcing is part of the procurement requirement.
How fast can I get the Sta-Kon 11789M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon 11789M come with a warranty?
Absolutely. The Sta-Kon 11789M is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon 11789M?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon 11789M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.