Metallics JFWP42SS 12 x 2 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$578.57
Metallics JFWP42SS 12 x 2 in. Flat Head Phillips Wood Screws - 18-8 Stainless - 100qty

Metallics JFWP42SS 12 x 2 in. Flat Head Phillips Wood Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JFWP42SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$578.57
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
12 x 2 in. Flat Head Phillips Wood Screws - 18-8 Stainless - 100qty

  • Features

    • 12 Diameter, 2" Length
    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • Flat Head with Phillips Drive
    • 18-8 Stainless Material
    • Stainless wood screws are usually supplied without additional finish

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#3
Fastener Head Height:
0.132 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.389 - 0.438 in.
Fastener Length:
2
Field Application:
Electrical, Plumbing, Heating, Air Conditioning Industries
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.148 - 0.171
Phillips Recess Diameter:
0.270 - 0.283
Phillips Recess Width:
0.036
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
1.45 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
11
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Details:
Wood Screw
Product Material:
18-8 Stainless

Metallics JFWP42SS – Frequently Asked Questions

1) How many Metallics JFWP42SS wood screws come in a jar, and can I buy just a few?
The JFWP42SS ships in a jar of 100, and 100 is the order minimum. There is no loose or small-count break on it, so plan on a full jar per order.
2) Will a #12 x 2 in. stainless wood screw hold up outdoors or in a wet location?
These are 18-8 stainless, which is the austenitic grade used where plain or zinc-plated screws would rust, so exterior trim, damp mechanical rooms and coastal-adjacent work are normal uses. Stainless wood screws are supplied bare, with no plating or coating over them.
3) Can I use the Metallics JFWP42SS on a Buy American or ARRA funded job?
No. The JFWP42SS is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. For federally funded work carrying those clauses you will need a domestically sourced fastener instead.
4) What driver bit do I need for the Metallics JFWP42SS flat head wood screw?
A #3 Phillips bit. The recess runs 0.270 to 0.283 inch in diameter and 0.148 to 0.171 inch deep, so a #2 bit will sit shallow and cam out, especially driving a 2 inch screw into hardwood.
5) Is the #12 x 2 in. Metallics screw threaded all the way to the head?
No. It carries thread over roughly two thirds of its length on a 2 inch screw, leaving a smooth shank under the head. That unthreaded shank is what lets the screw pull two pieces of wood tight instead of jacking them apart, so drill the top piece as a clearance hole.
6) Do these Metallics wood screws meet a recognized dimensional standard for submittals?
They are built to ASME B18.6.1, with the thread dimensions to ASME B18.6.1-1997. That is the wood screw standard a spec or submittal package will usually call out for head, recess and thread geometry.
7) What thread pitch and point does this wood screw have for pilot hole sizing?
Eleven threads per inch with a tapered gimlet point. The taper lets it start in softwood without a pilot, but in hardwood or near an edge, pre-drill the shank clearance and a smaller pilot for the threaded portion to avoid splitting.
8) Are these stainless screws suitable for mounting electrical boxes and strut backing to wood?
That is the intended use. Metallics lists the JFWP series for the electrical, plumbing, heating and air conditioning trades, and a #12 x 2 in. flat head stainless screw is a common choice for fastening device boxes, straps and backing to wood studs or blocking.
9) How much does a jar of 100 of these #12 x 2 in. stainless screws weigh?
A jar runs 1.45 lbs, with the container measuring 3 x 3 x 3.6 inches. Useful if you are kitting out a van or figuring shelf space in a stockroom.
How fast can I get the Metallics JFWP42SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP42SS come with a warranty?
Absolutely. The Metallics JFWP42SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP42SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP42SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!