Metallics JFWP42 12 x 2 in. Fl...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.40
$0.40
Metallics JFWP42 12 x 2 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

Metallics JFWP42 12 x 2 in. Flat Head Phillips Wood Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFWP42
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.40
$0.40
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
12 x 2 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

  • Features

    • Steel Zinc Material
    • Flat Head with Phillips Drive
    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • 12 Diameter, 2" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#3
Fastener Head Height:
0.132 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.389 - 0.438 in.
Fastener Length:
2
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Wood_Screw_Steel_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.148 - 0.171
Phillips Recess Diameter:
0.270 - 0.283
Phillips Recess Width:
0.036
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
1.45 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
11
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Finish:
Zinc
Product Details:
Wood Screw
Product Material:
Steel Zinc

Metallics JFWP42 – Frequently Asked Questions

1) How many screws come in a jar of Metallics JFWP42 wood screws?
The JFWP42 ships in a jar of 100, and 100 is the order minimum. Jar weight is listed at 1.45 lbs. If you need a different count or a different size in the same flat head Phillips wood screw family, other sizes and quantities are available by request.
2) What size Phillips bit do I need to drive a #12 x 2 in. Metallics wood screw?
A #3 Phillips bit. The recess is sized 0.270 to 0.283 in. in diameter and 0.148 to 0.171 in. deep, so a #2 bit will sit shallow in the recess and cam out under torque. Keep #3 bits on the gun for these.
3) Will these screws pass a Buy American or ARRA requirement on a federal job?
No. The JFWP42 is not Buy American compliant and not ARRA compliant, with multiple countries of origin. If your project has domestic sourcing language in the specs, these will not satisfy it and you need a domestically produced fastener.
4) Are zinc plated wood screws OK for outdoor or damp locations?
These are steel with a zinc finish, which is a dry-interior corrosion coating. For mounting straps, backboards, and device work inside a building it is fine. For exterior, wet, or treated-lumber applications, zinc plated steel is the wrong choice and you want stainless.
5) Do Metallics JFWP wood screws meet a recognized dimensional standard?
Head, recess, and thread dimensions are built to ASME B18.6.1, with threads to ASME B18.6.1-1997. That matters on spec jobs where the submittal calls for a standard wood screw rather than a proprietary fastener, because head and recess geometry are held to published tolerances.
6) What are #12 x 2 in. flat head wood screws typically used for on an electrical or mechanical job?
They are intended for the electrical, plumbing, and heating and air conditioning trades: fastening straps, clamps, hangers, panels, and backing into wood framing or plywood. The 2 in. length with a tapered point gives you enough bite to land through a strap and into a stud, and #12 is the heavier gauge you reach for when a #8 or #10 is not holding.
How fast can I get the Metallics JFWP42 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP42 come with a warranty?
Absolutely. The Metallics JFWP42 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP42?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP42 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!